论文部分内容阅读
过去,我厂精铸车间所用的蜡料,是事先将回收处理的蜡锭,用凿子铲成碎块,供搅拌蜡膏用。这种方法,不但劳动强度大,而且效率低。后经我们班同志的反复试验和实践,终于试验成一台风压喷蜡粉器。目前操作,只须将回收处理过的液态热蜡倒入缸内,通入压缩空气,就直接喷出形状象洗衣粉的蜡粉。该喷粉器结构简单,制造方便,每小时可自动喷蜡粉50公斤,提高效率三倍,保证了蜡膏的质量。一、工作原理喷蜡粉器结构如图所示。喷嘴2是用农药喷雾器上的喷头。输蜡管5与
In the past, the wax used in the casting workshop of our factory was a wax ingot that had been recycled beforehand, shovel it into pieces with a chisel, and use it to stir the wax paste. This method, not only labor-intensive, but also inefficient. After our class comrades repeatedly test and practice, finally tested into a typhoon spray wax device. The current operation, only the recycled liquid hot wax recycling into the cylinder, the introduction of compressed air, the shape of the direct injection of detergent like wax. The duster has the advantages of simple structure and convenient manufacture, and can automatically spray 50 kg of wax powder per hour to improve the efficiency three times and ensure the quality of the wax paste. First, the working principle Spray wax device structure as shown. Nozzle 2 is a sprayer on a pesticide sprayer. Lost wax tube 5 and