论文部分内容阅读
移动型工蓬可用于地面上和地下变压器的安装和电缆工作,既可改善工作条件,又能提高工作效率。工蓬由50×100毫米的木板架子,胶合板,镀锌铁板,铝板或玻璃纤维板制成的墙板,以及将墙板固定在架子上的带蝶形螺母的螺栓构成。采用透明的玻璃纤维波纹板作顶,用50×100毫米的双头螺栓作紧固件。工蓬宽1.5米,长2.1米,高1.8米。6毫米胶合校制成的工蓬共重122公斤。2个人在15分钟内就能搭好。工蓬内装有电灯和取暖电炉。用5瓩动型发电机供电。
The mobile utility model can be used for the installation and cable work of on-ground and underground transformers, which can improve working conditions and increase work efficiency. The utility model consists of a 50×100 mm wooden board frame, a plywood, a galvanized iron plate, a wall plate made of an aluminum plate or a glass fiber board, and a bolt with a wing nut fixing the wall plate to the frame. A transparent glass fiber corrugated plate was used as the top and a 50 x 100 mm stud bolt was used as a fastener. Gongpeng is 1.5 meters wide, 2.1 meters long and 1.8 meters high. The 6-inch glued school made a total weight of 122 kilograms. 2 people will be able to build in 15 minutes. There are electric lights and heating electric stoves in the utility. Powered by a five-shift generator.