论文部分内容阅读
New carbon based coatings have been developed for cutting of light metals such as aluminum. These coatings can be used either directly on the tool or as topcoating combined with another hard base coating. Cutting tests show that the coating gives good performance for materials that tend to stick to the cutting tools, such as aluminium alloys, because of the substantial reduction of appearance of the so-called built-up edge (BUE). This results in a longer life time of the tool and smoother surface finish of the cut made in the work-piece material. Especially in dry machining and deep hole drilling this coating performed very well. An overview of the properties and initial cutting results of this coating will be presented. This paper will also present results from recent industrial field tests carried out by a leading European aerospace manufacturer. Cutting forces, BUE formation and surface roughness data will be presented to explain the cutting process during dry machining.
New carbon based coatings have been developed for cutting of light metals such as aluminum. These coatings can be used either directly directly on the tool or as topcoating combined with another hard base coating. Cutting tests show that the coating gives good performance for materials that tend to stick to the cutting tools, such as aluminum alloys, because of the substantial reduction of appearance of the so-called built-up edge (BUE). This results in a longer life time of the tool and smoother surface finish of the cut made in the work-piece material. Especially in dry machining and deep hole drilling this coating performed very well. An overview of the properties and initial cutting results of this coating will be presented. This paper will also present results from recent industrial field tests carried out by a leading European aerospace manufacturer. Cutting forces, BUE formation and surface roughness data will be presented to explain the cutting process during dry machining.