【摘 要】
：
In this study, Al-CuO nanocomposites were fabricated by sol-gel method. As a contrast, the thermite was prepared by physical mixing at the equivalence ratio of
【机 构】
：
Department of Applied Chemistry, School of Chemical Engineering, Nanjing University of Science and T
论文部分内容阅读
In this study, Al-CuO nanocomposites were fabricated by sol-gel method. As a contrast, the thermite was prepared by physical mixing at the equivalence ratio of 0.5, 1, 2, respectively. The intermediates and samples as prepared were characterized by SEM and XRD. The exothermic properties of the two samples prepared at different equivalence ratios were tested and the reaction products were characterized by XRD. The SEM results show that the sample prepared by the sol-gel method demonstrates a micron-sized agglomerated sphere formed by a mutual wrapping of Al NPs and CuO NPs, and the particles are evenly distributed in the agglomerate. In addition, when the content of Al powder is seriously insufficient, the heat release of the sample prepared by physical mixing is 1.6 times that of by sol-gel method. With the increase of Al powder content, the exothermic properties of Al/CuO NPs prepared by sol-gel method began to increase significantly compared with physical mixing and the difference is 1.5 times when the equivalence ratio increases to 2. It can be concluded that the reason for this result may be attributed to the different mass transfer modes of components due to the different morphologies of samples.
其他文献
标准化与质量管理属于企业管理的两个重要方面,两者相辅相成,对形成产品质量十分重要.企业高质量发展是整个国民经济高质量发展的重要组成部分.标准和质量管理都是综合性的应
大学生志愿者行动是新的社会风尚,能推动社会进步、促进大学生自身全面发展,符合当代发展的潮流.对高校大学生志愿者服务来说,新闻传播专业大学生志愿者的理想信念与服务实践
目前,为保证学校的教学质量,我国高校普遍采用学生评教机制.评教机制的存在可以推动教学优化,提升人才培养质量,为我国高校教育事业做出贡献.传统的高校教育教学评价方法对当
This paper presents a comprehensive review of the research studies on direct energy system effect on aircraft composite structures to develop a good understanding of state-of-the-art research and development in this area.The review begins with the applica
中国人民大学电子文件管理研究中心主办的“中国电子文件管理论坛”,是我国电子文件与电子文件管理理论与实践最有权威、规模最大、持续时间最长、影响最大的主题论坛.从档案
介绍了采用X荧光光谱定量分析复杂玻璃成分的方法.通过制备直径40mm的玻璃圆片进行X射线荧光光谱定量分析,结果表明该方法制样简便,分析速度快,并对样品无任何损坏,同时对玻
为了探究不同曲率支管弯管对T型管冷热流体混合下热疲劳的影响,分别对支管上游曲率为0.006、0.01、0.02这3种弯管结构的T型管内冷热流体的混合过程进行大涡模拟(LES),将计算得到的瞬时温度和压力载荷动态地加载到固体域进行流固耦合计算,得到管道的热应力分布情况;再利用雨流计数方法对获得的波动热应力进行统计学分析,根据线性疲劳损伤累计准则进行热疲劳评估,得到管道的无量纲累计疲劳损伤率。将各个结构的无量纲时均温度、无量纲均方根温度和无量纲热疲劳损伤率等进行对比,数值结果表明:3种结构的温度和应力的分布和
对专用玻璃纤维织物单位面积质量精细控制的方法进行了研究,根据织物单位面积质量的范围区间要求,通过合理的数学计算,设计织物所用的玻璃纤维纱线管纱的质量控制范围,再通过
Fluoropolymers get increasing attention in energetic materials application due to the high fluorine content. To explore the effect of poly(vinylidene fluoride-c
In order to improve the infrared detection and discrimination ability of the smart munition to the dynamic armor target under the complex background,the multi-line array infrared detection system is established based on the combination of the single unit