论文部分内容阅读
本联动线用于加工木门框料,从毛方料进入四面刨光,嵌灰槽、凿眼、开榫、铲口、切脚头线等加工工胶,实行连续自动控制。操作人员从原来十四人减少到三至四人,日产量(以8小时计)从每人1600米提高到4450米左右。还减轻了劳动强度,有利于安全生产。联动线机组及自动组合: 在整个六边工序的加工过程中,共有四十多个自动动作,电控采用六个时间继电器,气控采用21个单、双电控气阀,7个节流气阀和延时阀。机控采用四个曲线轮,串联组合成自
This linkage line is used to process wooden door frame materials, from the raw materials into the four-sided planing, gray ash, chisel, open rake, shovel, cut the head line and other processing plastics, continuous automatic control. The number of operators was reduced from 14 to three to four. Daily production (in eight hours) increased from 1,600 meters to 4,450 meters per person. It also reduces labor intensity and is conducive to safe production. Linkage unit and automatic combination: In the whole six-side process, there are more than 40 automatic actions, six time relays are used for the electric control, 21 single and double electric control valves are used for the air control, and 7 throttle gas are used. Valve and delay valve. The machine control uses four curve wheels, which are combined in series.