论文部分内容阅读
带磨机是一种较理想的抛磨设备,目前国外普遍采用手工和完全自动化的带磨机,手工操作的带磨机由马达驱动,通过变速机构带动磨擦轮,磨擦轮带动一种特制的磨带旋转,当工件与磨带接触时,产生磨擦从而起到磨光作用。带磨工艺主要用于电镀后的磨光,表面高精度的精饰。采用磨带加工效率高,表面质量好,磨削量大,完全可以代替在布轮上、毛毡轮上粘结带有磨粒的抛光轮。带磨机由磨带、磨擦轮、拉紧装置、马达、主轴。防护罩、基座等组成。磨带由基体(纺织物)粘合剂(天然的或化学材科)磨粒(氧化铝、碳化硅)组成。磨粒有大小不同的
Belt mill is an ideal polishing equipment, currently widely used manual and fully automatic with a belt mill, hand-operated belt mill driven by the motor, driven by the friction wheel friction mechanism, friction wheel drive a special Belt rotation, when the workpiece and belt contact, resulting in friction to play the role of polishing. Belt grinding process is mainly used for polishing after plating, surface precision finishing. Abrasive belt processing with high efficiency, good surface quality, large amount of grinding, can replace the cloth wheel, blanket wheel bonded abrasive wheel with polishing. Belt mill by the belt, friction wheel, tensioning device, motor, spindle. Protective cover, base and other components. Abrasive tape consists of a matrix (textile) binder (natural or chemical) abrasive (alumina, silicon carbide). Abrasive particles have different sizes