论文部分内容阅读
In current research about nanofluid convection heat transfer, random motion of nanoparticles in the liquid distribution problem mostly was not considered. In order to study on the distribution of nanoparticles in liquid, nanofluid transport model in pipe is established by using the continuity equation, momentum equation and Fokker-Planck equation. The velocity distribution and the nanoparticles distribution in liquid are obtained by numerical calculation, and the effect of particle size and particle volume fraction on convection heat transfer coefficient of nanofluids is analyzed. The result shows that in high volume fraction( φ= 0.8%), the velocity distribution of nanofluids characterizes as a “cork-shaped” structure, which is significantly different from viscous fluid with a parabolic distribution. The convection heat transfer coefficient increases while the particle size of nanoparticle in nanofluids decreases. And the convection heat transfer coefficient of nanofluids is in good agreement with the experimental result both in low( φ≤ 0.1%) and high( φ= 0.6%) volume fractions. In presented model, Brown motion, the effect of interactions between nanoparticles and fluid coupling, is also considered, but any phenomenological parameter is not introduced. Nanoparticles in liquid transport distribution can be quantitatively calculated by this model.
In current research about nanofluid convection heat transfer, random motion of nanoparticles in the liquid distribution problem mostly was not considered. In order to study on the distribution of nanoparticles in liquid, nanofluid transport model in pipe is established by using the continuity equation, momentum equation and Fokker-Planck equation. The velocity distribution and the nanoparticles distribution in liquid are obtained by numerical calculation, and the effect of particle size and particle volume fraction on convection heat transfer coefficient of nanofluids is analyzed. The result shows that in high volume fraction ( φ = 0.8%), the velocity distribution of nanofluids characterizes as a “cork-shaped” structure, which is significantly different from viscous fluid with a parabolic distribution. The convection heat transfer coefficients increases while the particle size of nanoparticle in nanofluids distribution. And the convection heat transfer coefficient of nanofluids is in good In the model, Brown motion, the effect of interactions between nanoparticles and fluid coupling, is also considered, but any phenomenological parameter is not introduced. Nanoparticles in liquid transport distribution can be quantitatively calculated by this model.