Characterization for Fusion Candidate Vanadium Alloys

• 作 者: T.Muroga T.Nagasaka J.M.Chen Z
• 机 构: National Institute for Fusion Science,Southwestern Institute of Physics,Institute of Plasma Physics
• 出 处: 等离子体科学和技术
• 发表日期: 2004年期
• 关键词: vanadium alloys characterization nuclear fusion
• 基金项目: The Core-University Program on Plasma and Nuclear Fusion sponsored by JSPS (Japan) and CAS (China)

This paper summarizes recent achievements in the characterization of candidate vanadium alloys obtained for fusion in the framework of the Japan-China Core University Program.National Institute for Fusion Science (NIFS) has a program of fabricating high-purity V-4Cr4Ti alloys. The resulting products (NIFS-HEAT-1,2), were characterized by various research groups in the world including Chinese partners. South Western Institute of Physics (SWIP) fabricated a new V-4Cr-4Ti alloy (SWIP-Heat), and carried out a comparative evaluation of hydrogen embrittlement of NIFS-HEATs and SWIP-Heat. The tensile test of hydrogen-doped alloys showed that the NIFS-HEAT maintained the ductility to relatively high hydrogen levels.The comparison of the data with those of previous studies suggested that the reduced oxygen level in the NIFS-HEATs should be responsible for the increased resistance to hydrogen embrittlement.Based on the chemical analysis data of NIFS-HEATs and SWIP-Heats, neutron-induced activation was analyzed in Institute of Plasma Physics (IPP-CAS) as a function of cooling time after the use in the fusion first wall. The results showed that the low level of Co dominates the activity up to 50 years followed by a domination of Nb or Nb and Al in the respective alloys. It was suggested that reduction of Co and Nb, both of which are thought to have been introduced via cross-contamination into the alloys from the molds used should be crucial for reducing further the activation.