【摘 要】
：
The methanol-to-gasoline (MTG) process is an efficient way to produce liquid fuel.The academic basis of the coal-to-liquid process is described and two different syn-thesis processes are focused on: Fixed MTG process and Fluid Bed MTG process.Then,the sup
【机 构】
：
School of Mechanical Electronic & Information Engineering,China University of Mining & Technology(ge
论文部分内容阅读
The methanol-to-gasoline (MTG) process is an efficient way to produce liquid fuel.The academic basis of the coal-to-liquid process is described and two different syn-thesis processes are focused on: Fixed MTG process and Fluid Bed MTG process.Then,the superiority of the Fluid Bed MTG Process is pointed out relative to the Fixed MTG Process.In addition,the development of the coal-to-liquid technique in China is briefly summarized.
其他文献
The volatilization behavior of Cu, Pb, Sn, Sb, Ni, Zn, Mn, Co, Cr, Cd during pyrolysis of waste printed circuit boards was investigated in a bench-scale fixed-bed pyrolysis system. It was found that volatility of heavy metals increases with operating temp
Carried on the one-dimensional analysis to the motion state of coal-gas flow in the outburst hole, and deduced the relational expression between the motion parameters (containing of velocity, flow rate and density etc.) of bursting coal-gas flow and gas p
In order to research how lignite is utilized, two coal samples of seams 2 and 4were taken from the Huangxian Basin, China. The samples were separated into vitrinite,sporinite, and resinite. Geo-chemical and pyrolysis methods were used to analyse three mac
Laser cladding of 316 L steel powders on pick substrate of coal mining machine was conducted, and microstructure of laser cladding coating was analyzed. The micro-hardness of laser cladding coating was examined. The results show that microstructure of las
Seven Shenfu coal powders different in particle size obtained by sieving and ball milling were used to probe their adsorption properties to phenol from water.The results show that the kinetics of phenol on coal powders follow the second-Order adsorption k
By combining the practices of deep mine mining in Changguang Mine field and using the Universal Distinct Element Code 3.0(UDEC3.0) numerical computing method, the distribution characteristics of deformation field and stress field as well as the surroundin
Large-scale bed separation in bending strip upside cranny strip was brought by un-consistency of overlying strata subsidence movement due to under surface mining.Different characteristic of movement and deformation of overlying strata and surface include
Virtual dynamic optimization design can avoid the repeated process from design to trial-manufacture and test. The designer can analyze and optimize the product structures in virtual visualization environment. The design cycle is shortened and the cost is
Studied the principle of transient electromagnetic method in coalmine and solved the computation of the whole time apparent resistivity and the relation between apparent resistivity and exploration depth and so on. Studied the work method of transient ele
A method system was put forward based on the occupational health and safety management system to develop the dynamic safety management of coal mine. It aimed at the problems in the mining safety management and was put in practice in Lingxin coal mine of N