Transition from Unsteady Flow Inception to Rotating Stall and Surge in a Transonic Compressor

来源 :热科学学报(英文版) | 被引量 : 0次 | 上传用户:w18asp
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Since the transition from rotating stall to surge in a transonic compressor at high speed is very quick,quite often there is no time to take measures to prevent the surge.Therefore,it is desired to find any rotating stall precursors,of which the occurrence can offer sufficient time for stall or surge prevention.In this study,a series of unsteady flow analyses were performed on a transonic compressor under operating conditions before rotating stall with unsteady results scrutinized to find rotating stall precursors.Particular attention is paid to the spatial modes and time modes of static pressure near the casing and around the blade leading and trailing edges.The results show that the characteristics of the precursor in both spatial and time domains can be used as rotating stall warnings.
其他文献
The rotor blade height with low hub-tip ratio is relatively longer,and the aerodynamic parameters change drastically from hub to tip.Especially the organization of flow field at hub becomes more difficult.This paper takes a transonic 1.5-stage axial compr
To study the feasibility of using machine learning technology to solve the forward problem (prediction of aerodynamic parameters) and the inverse problem (prediction of geometric parameters) of turbine blades,this paper built a forward problem model based
Tip leakage flow has become one of the major triggers for rotating stall in tip region of high loading transonic compressor rotors.Comparing with active flow control method,it\'s wise to use blade tip modification to enlarge the stable operating range o
A 2 MW gas turbine engine has been developed for the distributed power market.This engine features a 7:1 pressure ratio radial inflow turbine.In this paper,influences of various geometry features are investigated including turbine tip and backface clearan
介绍了QTJC5-S600-2原木自动检测分拣设备的研发设计要点、技术性能指标与技术参数和创新点,并与国外同类产品技术水平进行了比较,原木直径和长度自动检测设备是贮木场、制材厂和人造板生产实现自动化的关键设备.
The combustion of ammonia (NH3) has attracted wide interest in fuel vehicle engines,marine engines,and power generators to mitigate carbon dioxide emissions.Unfortunately,the relatively low laminar flame speed presents a technical barrier for this renewab
木门的变形是一个比较常见的问题,导致变形的原因很多.本文从复合门扇的结构、使用的材料、生产工艺、安装、使用环境等方面进行了论述,分析了各个因素,并提出了相关的解决措施.
To enhance the understanding of design characters,which have prominent influences during the fan blade out event,a simplified geometrical and dynamic analysis method was derived,and a typical 2-shaft high bypass ratio turbofan engine was selected and mode
Coanda jet flap is an effective flow control technique,which offers pressurized high streamwise velocity to eliminate the boundary layer flow separation and increase the aerodynamic loading of compressor blades.Traditionally,there is only single-jet flap
The supersonic multi-hole probe is an essential test tool for wind tunnel experiments,which is necessary to develop the basic research of improving the measurement accuracy and expanding the application of the probes.This paper theoretically derived a gas