论文部分内容阅读
粘贴玻璃马赛克的步骤如下: 1.材料准备:玻璃马赛克,普通水泥,细砂,石灰,无侵蚀性的水。 2.基层处理:用50号水泥砂浆在需要铺贴玻璃马赛克的墙面上或地面上打底找平,作为贴基层,贴基层厚度以控制在8~10毫米为宜。 3.定位:先向贴基层喷水,待贴基层干湿适合以后,在贴基层上用黑线根据每张玻璃马赛克尺寸的大小,弹出相应的方格,为玻璃马赛克的准确
The steps for pasting glass mosaics are as follows: 1. Material preparation: glass mosaic, ordinary cement, fine sand, lime, non-aggressive water. 2. Primary treatment: Use 50 cement mortar to make a leveling on the wall surface or on the ground that needs to be paved with glass mosaics. As a base layer, the base layer thickness should be controlled within 8 to 10 mm. 3. Positioning: Spray the water on the base layer first. After the base layer is wet and dry, apply a black line according to the size of each glass mosaic to pop up the corresponding squares for the glass mosaic.