论文部分内容阅读
在无专用设备的情况下,如何用普通车床绕制长达2.6米的波形弹簧呢?下面介绍一下我们的实践经验供参考。一、工作原理在普通车床上,装上波形心轴,根据卷制后弹簧内(或外)径增大的原理,首先在波形心轴上绕制一段。弹簧松开后,内径增大到允许尺寸。退出弹簧,调头穿人心轴,用紧定圆圈和螺钉把波形弹簧紧住(起三爪夹盘作用),由尾部向床头方向绕制到最初一个波峰;放松,第二次卷制好这段波形
In the absence of special equipment, how to use ordinary lathe winding up to 2.6 meters wave spring it? Here are some of our practical experience for reference. First, the working principle In the ordinary lathe, fitted with a wavy mandrel, according to the spring after rolling (or outer) diameter increases the principle, the first winding in the waveform mandrel section. After the spring is loosened, the inner diameter increases to the allowable size. Exit the spring, turn the mandrel through the mandrel, with a tight circle and screw the wave spring tight (from the role of three jaw chuck), from the tail to the head of the bed to the first wave of the winding direction; relax, the second roll well Segment waveform