论文部分内容阅读
高精度端面凸轮如图1所示。凸轮曲线用φ10h7的钢球测量,其中心轨迹是以角ψ为自变量的指数曲线,端面升程的函数方程为: y=C-C_1×10~(-c2(ψ-c_3))式中C、C_1、C_2、C_3均为常数。端面凸轮的最大升程h_(max)=8. 366mm。其中0°～200°的曲线升程允差为±0.01mm;200°～316°的曲线升程允差为±0.005mm,每隔30＇作一次升程测量,凸轮光洁度为8;其余316°～0°为回程部分,只作圆滑过渡。端面凸轮的材料为4Gr13,淬火硬度HRC54
High-precision face cam shown in Figure 1. The cam curve is measured with a steel ball of φ10h7. The center locus is an exponential curve with the angle φ as an independent variable. The function equation of the end lift is: y = C - C_1 × 10 ~ (-c2 (ψ-c_3)) C, C_1, C_2, C_3 are constant. The maximum lift of the face cam h_ (max) = 8. 366mm. Of which 0 ° ~ 200 ° curve lift tolerance of ± 0.01mm; 200 ° ~ 316 ° curve lift tolerance of ± 0.005mm, every 30 ’for a lift measurement, the cam finish is 8; the remaining 316 ° ~ 0 ° for the return part, only for a smooth transition. The material of the end face cam is 4Gr13, quenching hardness HRC54