Influence of chemical composition and alloying elements on microdefects and electron density in Ni-

来源 :Transactions of Nonferrous Metals Society of China | 被引量 : 0次 | 上传用户:cse_gzzhu
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Positron lifetime spectra have been measured in binary Ni Al alloys with different chemical composition and NiAl alloys doped with Cr, Zr, Fe and Mg. The results indicate that in B2 NiAl and Ll 2 Ni 3Al alloys, some of the valance electrons of Ni and Al atoms are localized, which leads to a lower free electron density of the alloy. The mean free electron density of the binary Ni Al alloy decreases with increasing Al content. The open volume of defects on grain boundary of the Ni 3Al is larger than that of monovacancy or dislocation. Structural vacancies and microvoids are found in B2 NiAl alloys with Al content above 45%(mole fraction), and the concentration of the vacancies and open volume of microvoids will increase with higher Al content. The addition of Cr, Zr and Fe into a NiAl alloy can increase its mean free electron density and reduce the open volume of defects on its grain boundary, while with addition of Mg into the NiAl alloy, its mean free electron density decreases and open volume of boundary defects increases. Positron lifetime spectra have been measured in binary Ni Al alloys with different chemical composition and NiAl alloys doped with Cr, Zr, Fe and Mg. The results indicate that in B2 NiAl and Li 2 Ni 3Al alloys, some of the valance electrons of Ni and The mean free electron density of the binary Ni Al alloy decreases with increasing Al content. The open volume of defects on grain boundary of the Ni 3Al is larger than that of monovacancy or dislocation. Structural vacancies and microvoids are found in B2 NiAl alloys with Al content above 45% (mole fraction), and the concentration of the vacancies and open volume of microvoids will increase with higher Al content. The addition of Cr, Zr and Fe into a NiAl alloy can increase its mean free electron density and reduce the open volume of defects on its grain boundary, while with addition of Mg into the NiAl alloy, and open volume of boundary defects increases.
其他文献
前国内ZX5系列焊机一般都没有电流调节和电弧推力调节功能。在小电流焊接时 ,电弧推力对电弧稳定性和增加熔深都起到很重要的作用 ,我公司在焊接热力管道时 ,由于全位置焊接 ,
欧洲13个中心前瞻性研究比较了膀胱癌高危患者采用HLA荧光膀胱镜和常规膀胱镜检测原位癌。采用HLA荧光膀胱镜和常规膀胱镜进行患者自身对照。患者膀胱内灌注8mmol/LHLA溶液5
每次当我看镜子的时候都会被自己现在衰老的脸震惊,但是我仍然被生活深深吸引。我确信不断思考的时候,内心深处还是年轻的,所以现在坐在你对面的还是个少年,然而我的身体并不
通过对焊缝各种缺陷试板的实验 ,优化出探头的各种参数 ,以达到探头的最佳参数配置。利用优化出的探头对设计的多种试块进行方法研究 ,检测结果与设计缺陷种类和尺寸具有良好
本研究通过半结构化访谈,调查了中国大陆某重点高校学者撰写及在国际性期刊上发表英语论文时遇到的问题,并就此与香港地区学者在此过程中遇到的问题进行了对比。研究发现,语
The process parameters of aluminum alloy ladder bowl with viscous pressure forming and solid metal punch forming were numerically simulated by commercial finite
期刊
0 前  言全数字焊机是在逆变电源基础上 ,结合计算机技术 ,采用数字信号处理器 (DSP) ,通过微处理器的精确运算来控制焊机的各项性能及工作全过程 ,控制电路高度集成、简化。
在modifiedψ -衍射几何条件下 ,研究铍材表层中存在不同应力梯度时d~ (sinψ) 2 曲线的形状 ,确定铍材表面层应力梯度对常规X -射线应力测试的影响。结果表明 ,在 (sinψ) 2
The 2024/3003 aluminum gradient alloys are prepared by semi continuous casting. The influences of throttle bore diameter of embedded nozzle and temperature of
期刊
乳腺癌的发生、发展和治疗具有很强的个体特异性.寡核苷酸芯片是一种高通量基因检测技术[1].目前,该项技术已被用于炎症[2]和细胞分化[3]相关基因等研究领域.本研究制备了288条人类肿瘤相关基因的寡核苷酸芯片,并对乳腺癌组织和正常乳腺黏膜组织所表达的基因进行筛选,同时进行差异表达基因生物信息学分析研究,以揭示这些差异基因与乳腺癌发生、分化、浸润及淋巴结转移之间的内在联系。