论文部分内容阅读
目前,千家万户使用的蜂窝煤饼炉(简称煤饼炉),其出渣方式十分不方便,经对煤饼炉进行改造后,出渣既方便,又提高了煤饼炉的热效率。我们对任何型式的煤饼炉均不改变其上部燃烧结构(即外壳形状、大小,炉胆锅架形状和大小等),只是重新设计炉桥以下部分,为使煤饼渣能从下部直接取出。我们去掉炉桥,在下部新增一个出渣装置,见图。让煤饼能从上到下自由移动。出渣装置由煤饼夹6、连杆8、拉簧9,出灰板4和定位块5组成。使用时,将推板7朝左轻轻一推,连杆8将煤饼夹6朝外张开,上部的煤饼将自行落在出灰板4上,松开于,拉簧
At present, the honeycomb briquette burners used by millions of households (hereinafter referred to as briquette burners) have a very inconvenient slag discharging mode. After the coal briquette burners are reformed, the dregs are convenient and the thermal efficiency of the briquette burners is increased. We do not change the combustion structure of the upper part of any type of bake furnace (ie, the shape and size of the shell, the shape and size of the baffle, etc.), but redesigned the following sections of the bridge, in order to make the dregs from the lower part directly . We removed the bridge, in the lower part of a slag device, see figure. Let briquettes move freely from top to bottom. The slag device consists of briquetting clip 6, connecting rod 8, tension spring 9, ash plate 4 and positioning block 5. When in use, the push plate 7 is gently pushed to the left, the connecting rod 8 opens the briquette clip 6 outwardly, the upper briquette will fall onto the ash-out plate 4 by itself,