论文部分内容阅读
为了加工三种不同尺寸的轴斜齿轮,我们对Y 4250型剃齿机进行了设计改装。将工作台顶尖距由 500 mm改成 660 mm;工作台行程长度由 100改成 132 mm;工件最大宽度由90改成了 132 mm。 改装后的结构如下图所示,具体改装方法如下: 1.工作台增加右端接块6和左端接块2的厚度分别为 45
In order to process three different sizes of shaft helical gears, we designed and modified the model Y 4250 shaver. Change the top of worktable from 500 mm to 660 mm; Workbench stroke length from 100 to 132 mm; Workpiece maximum width from 90 to 132 mm. The modified structure as shown below, the specific modification method is as follows: 1. Workbench to increase the thickness of the right end of the junction block 6 and the left end of the junction block 2 were 45