任楼煤矿水源判别模型的自动识别

来源 :煤田地质与勘探 | 被引量 : 0次 | 上传用户:liantonglingsheng
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
在新区矿井样本少的条件下,多类判别的问题一直难以解决,特别是发生过突水淹井的煤矿,各含水层的地下水有了一定的混合,判别水源就更为困难。因此需要一种快速、有效、准确的判别方法,对水源逐对辨别,并按概率最高者归类。将这一方法应用于任楼煤矿,对某工作面凭经验难以判别的水源进行确定,收到了很好的效果,肯定了注浆效果,取消了防水闸门。这一结论已被生产验证。这种方法在水样少的条件下具有普遍的用途。 Under the condition of few sample of mine in new area, many kinds of discrimination problems have been difficult to solve. Especially in the coal mines where water inrush occurred, the groundwater in each aquifer has a certain degree of mixing, so it is more difficult to judge the water source. Therefore, a fast, effective and accurate discriminant method is needed to distinguish water sources one by one and classify them according to the highest probability. Applying this method to Renlou Coal Mine, it is very difficult to identify the water source that is difficult to judge by a certain working face. It has achieved good results, confirms the effect of grouting and cancels the waterproof gate. This conclusion has been verified by production. This method has a universal use in watery conditions.
其他文献
为探究吕家坨井田地质构造格局,根据钻孔勘探资料,采用分形理论和趋势面分析方法,研究了井田7
为探究吕家坨井田地质构造格局,根据钻孔勘探资料,采用分形理论和趋势面分析方法,研究了井田7
讨论了乳状液膜分离技术提取Cu2 +的络合—扩散传输过程 ,建立了乳状液膜分离技术的络合—扩散的传质数学模型 The process of complexation-diffusion transfer of Cu2 + b
针对油套管特殊螺纹球面对锥面密封结构,基于Hertz接触理论建立了考虑密封面作用扭矩的球面密封接触应力理论模型,研究了球面半径、管体球面弹性模量和密封面作用扭矩对密封
利用动态平差原理,处理了克孜尔水库水准监测网的14期跨断层流动水准资料,对穿过库区主坝、副坝之间F2断层的形变机制进行了初步研究.结果表明F2断层的活动属继承性活动,其活
以乙酸锂、乙酸锰、乙酸镍和乙酸钴为原料,去离子水为溶剂,乙醇酸作为配位剂,采用溶胶凝胶法分别在800℃、850℃、900℃和950℃烧结制备了0.5Li2MnO3· 0.5Li[Mn1/3Ni1/3Co1/
为探究吕家坨井田地质构造格局,根据钻孔勘探资料,采用分形理论和趋势面分析方法,研究了井田7
在分析图像扫描过程中产生形变之实质的基础上,提出了建立图像扫描过程中形变校正数学模型的方法.
为探究吕家坨井田地质构造格局,根据钻孔勘探资料,采用分形理论和趋势面分析方法,研究了井田7
为探究吕家坨井田地质构造格局,根据钻孔勘探资料,采用分形理论和趋势面分析方法,研究了井田7