论文部分内容阅读
西柳溝流量站用木匣制成了一种过河纜上油器,系由油箱、滑輪、螺絲、器盖及鉄环組成。上油器分上下兩部分由螺絲联系一起(如圖),滑輪設在上部的下边,使滑輪在纜上滚动。在上部的頂端中心处設有器盖,用以往箱內加油。下部安有鉄环,环下吊系重物,以保持上油器在纜上平稳,同时使上油器与吊纜連接,以便测船移动上油器亦随之在纜上移动,而往纜上塗油。上油时,先將螺絲扭开,使上下两部分离开,將横纜夾在上油器中間,并过横河纜通过上油器兩端的圓孔,將螺絲上紧,并在环上系以重物,与吊纜連在
Xiluogou flow station with a wooden box made of a river cable oiler, the Department of the tank, pulleys, screws, cover and 鉄 ring. Oiler up and down the two parts by the screws together (pictured), set in the lower part of the pulley, the pulley on the cable rolling. In the top of the upper center of the lid is provided to fill the tank. The lower part is equipped with a stirrup ring which is used for lifting the heavy object under the ring to keep the oil cooler steady on the cable and to connect the oil cooler with the cable so as to move the oil cooler along with the cable while moving Oil on the cable. Oil, the first twist open the screw, so that the upper and lower two parts away, the horizontal cable clip in the middle of the oil, and across the river through the oil on both ends of the hole, the screw tighten, and the Department of the ring To heavy objects, and the cable connected