Cu在Zr-2.5N b-0.5Cu合金及其腐蚀生成氧化膜中的存在形式

来源 :稀有金属材料与工程 | 被引量 : 0次 | 上传用户:feixiang20090911
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
用电子显微镜研究了合金元素Cu在Zr-2.5Nb-0.5Cu合金及其腐蚀生成氧化膜中的存在形式。合金基体中的元素Cu主要以四方结构的CuZr2第二相形式存在,CuZr2相中会富集杂质元素Fe。合金经过550℃,25MPa超临界水条件深度腐蚀后,伴随着合金基体发生的H致β相变,CuZr2第二相也发生了相消溶、扩散及凝聚长大过程。在腐蚀生成的氧化膜中,合金元素Cu以非晶氧化物的形式存在于氧化锆的晶界。 The existence of alloying element Cu in the Zr-2.5Nb-0.5Cu alloy and its corrosion-induced oxide film was studied by electron microscope. The elemental Cu in the alloy matrix mainly exists in the second phase of CuZr2 structure of tetragonal structure, and the impurity element Fe is enriched in the CuZr2 phase. After the alloy was deeply corroded by supercritical water conditions of 550 ℃ and 25MPa, along with the H induced β phase transformation, the second phase of CuZr2 also dissolved, diffused and condensed and grew up. In the oxide film formed by etching, the alloying element Cu exists in the form of an amorphous oxide at the grain boundary of zirconia.
其他文献
利用浸渍法制备了Pd/γ-Al2O3催化剂,采用X射线粉末衍射(XRD)、X光电子能谱(XPS)和程序升温还原(TPR)等物理化学手段对其进行了表征,并在固定床微型反应器上考察了其催化活性
以聚偏氟乙烯膜(PVDF)为支撑体,煤油为膜溶剂,N-N-二(1-甲基庚基)乙酰胺(N503)为流动载体,研究了分散支撑液膜体系中金属Pd(Ⅱ)的传输行为;考察了料液相酸度、分散相膜溶液与
研究了厚度40 μm的Pd8.5Y0.19Ru(原子分数)合金膜的氢渗透性能.结果表明,在573~723 K温度范围内,氢在膜中的渗透符合Fick第一定律,氕、氘的渗透率表达式分别为φH=2.566×10-
采用真空感应熔炼方法,制备了一系列Cu掺杂的MI(NiCoMnAlCu)5.0即AB5.0型贮氢合金。通过电化学及X射线衍射等手段,系统地研究和分析了Cu掺杂对AB5.0型贮氢合金的电化学性能(
对FGH4096合金进行了变形温度1050~1140℃,应变速率0.001~2s-1的热压缩实验。分析了合金的流变行为,构建了Arrhenius型本构方程,得到合金的热变形激活能为870.785kJ/mol。并建
In the present work, the coupled effects of initial structure and processing parameters on microstructure of a two-phase titanium alloy were investigated to pre
期刊
In this study, the microstructure of B319 casting alloys and effects of five different casting conditions on microstructure were studied. Multi-sc ale microstru
期刊
特种作业人员所从事的工作,在安全程度上与单位内的其它工作存在较大差别。他们在工作中接触的危险因素较多,危险性较大,很容易发生生产安全事故,而一旦发生事故,不仅对作业
采用X射线四环衍射及电子背散射衍射技术对Ni-9.3at%W(Ni9W)温轧基带表面进行轧制织构与再结晶织构分析,研究了Ni9W合金基带温轧织构的形成与转变。结果表明,轧制过程采用温
《教育部关于加强高专教育人才培养工作的意见》(教高[2 0 0 0 ]2号 )指出 :“高职高专教育培养拥护党的基本路线 ,适应生产、建设、管理、服务第一线需要的 ,德、智、体、美