论文部分内容阅读
本人于1995年底给自己的386DX/40兼容机加装了Acer 525E倍速光驱、声卡及解压卡,着实过了一把多媒体瘾。 可惜好景不长,不久在执行光驱开门操作时,有光盘在里面时能够打开,而无光盘时则打不开,打不开时可听到卸载电机动作的声音,要在按下开关键后立即压一下光驱门才能打开;同时在执行关门动作时无光盘时可正常执行,而有光盘时有时不能顺利进行,须用手轻托一下托盘才能收进,我一直将就着用。一段时间后又发现光驱读盘速度变慢,并出现部分文件读出错、部分光盘不可读等故障,自认为是由于灰尘附着在激光头表面,致使激光束聚焦不良或到达光盘表面的
I at the end of 1995 to their own 386DX / 40 compatible with Acer 525E-speed optical drive, sound card and decompression card, really had a multimedia addiction. Unfortunately, good prospects will not be long. When the CD-ROM drive is opened soon, the CD-ROM can be opened when there is a CD-ROM in it. When the CD-ROM is not opened, the sound of unloading the motor can be heard. Immediately press the CD-ROM door to open; at the same time in the implementation of the closing operation without CD-ROM can be implemented normally, and sometimes the CD-ROM sometimes can not be carried out smoothly, it is necessary to lightly care about the tray to accept, I will always be used. After a period of time and found that the optical drive to read the disk slowed down, and some documents read the wrong part of the CD unreadable fault, since that is due to dust attached to the laser head surface, resulting in poor or poor laser beam to reach the surface of the disc