论文部分内容阅读
我厂中小型变压器产量逐年增多,特别是对铁心夹件需要有专门的配焊架具,以保证槽钢与所有角板的垂直度,角板与角板的平行度,并减小夹件的变形。我厂设计的铁心夹件配焊架具的结构,如图1所示。配焊架具由铸铁平板、定位块、靠板及螺杆等部分组成。平板、靠板、定位块经机械加工刨制而成,并在平板上铣两条长槽。槽长根据夹件与两块角板焊接时最大尺寸和最小尺寸而定,要求定位块与平板垂直。
Our small and medium-sized transformer production increased year by year, especially for iron core clamps need to have a special welding fixture, in order to ensure that the channel with all the angle of the vertical, angle and angle plate parallelism, and reduce the clip The deformation. I designed the core folder with welding fixture structure, shown in Figure 1. With welding fixture with cast iron plate, positioning block, by the board and screw and other components. Plates, by the board, positioning block planed by machining and milling two long grooves in the flat. Groove length according to the clamp and the two gusset welding maximum size and minimum size may be required positioning block and the vertical plate.