与建筑一体化太阳能双效集热器系统在被动采暖工作模式下的热特性研究

来源 :太阳能学报 | 被引量 : 0次 | 上传用户:yst598
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
针对该新型系统的被动采暖工作模式,基于热箱实验平台,实验研究分析系统该工作模式下运行的热特性情况。研究结果表明,系统在冬季被动采暖工作模式下,房间室内空气温度存在明显的温度分层现象,且温度分层造成的室内上下部的温差与投射在系统集热模块表面的太阳辐射强度存在某种线性关系。此外,实验结果还显示,系统在冬季被动采暖工作模式下依靠热虹吸作用可使集热模块上风口的空气温度加热至50℃以上。 Aiming at the passive heating mode of the new system, based on the experimental platform of the hot box, the thermal characteristics of the system operating under the working mode are analyzed experimentally. The results show that there is a significant temperature stratification in room air temperature under passive heating mode in winter and temperature difference between the upper and lower part of the room caused by temperature stratification and the solar radiation intensity projected on the surface of the system collector module A linear relationship. In addition, the experimental results also show that the system relies on thermal siphon effect in the passive winter heating mode to heat the air temperature of the outlet of the heat collecting module to over 50 ° C.
其他文献
近来,通过仿冒真实网站的URL地址及其页面内容的“钓鱼网站”已严重威胁到互联网用户的隐私和财产安全.为了应对这种威胁,该文通过对大量已知正常网站和钓鱼网站的学习,解析
使用扰动观察法的光伏系统在初始化启动过程中或光强发生较大变化时,由于受扰动步长的限制,无法快速接近最大功率点,造成大量能量的浪费.针对该情况提出一种快速最大功率点预
A robust airfoil optimization platform is constructed based on the modified particle swarm optimization method (i.e.,the second-order oscillating particle swarm
A simplified method for the simulation of the ergodic spatially correlated seismic ground motion is proposed based on the commonly used original spectral repres
为了较为简洁高效准确地获得串联电阻Rs、并联电阻Rsh、品质因子m、反向饱和电流J0和光生电流Jph等器件参数,提出一种利用太阳电池伏安特性曲线(J-V曲线)提取这些器件参数的
基于顺序开关分流调节器(sequential switching shunt regulator,S3R)的工作原理建立系统小信号数学模型,分析系统的幅相特性、输出阻抗.详细叙述过调节现象的成因及变化过程
针对太阳能硅片多线切割机的张力检测问题,提出一种无传感器的张力检测新方法,通过构造一个张力观测器来计算张力值。分析太阳能硅片多线切割机走线系统的等效模型,建立模型
建立逆变器并联系统模型,揭示直流侧共模电压和漏电流产生原因.根据PWM脉冲产生机理以及数字实现特点,从不同调制方式脉冲规律出发,提出一种并联逆变器直流侧共模电压谐波分
采用热传导原理并结合ANSYS Workbench温度场分析,研制一种带温控功能的聚光PV/T组件。经实验测试,在通过聚光器获得的5倍太阳辐射强度下,该PV/T组件可有效解决聚光晶硅电池