Confined Ni-In intermetallic alloy nanocatalyst with excellent coking resistance for methane dry ref

来源 :能源化学 | 被引量 : 0次 | 上传用户:yangpin1
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Carbon dioxide and methane are two main greenhouse gases which are contributed to serious global warming.Fortunately,dry reforming of methane (DRM),a very important reaction developed decades ago,can convert these two major greenhouse gases into value-added syngas or hydrogen.The main prob-lem retarding its industrialization is the seriously coking formation upon the nickel-based catalysts.Herein,a series of confined indium-nickel (In-Ni) intermetallic alloy nanocatalysts (InxNi@SiO2) have been prepared and displayed superior coking resistance for DRM reaction.The sample containing 0.5 wt.% of In loading (In0.5Ni@SiO2) shows the best balance of carbon deposition resistance and DRM reac-tivity even after 430 h long term stability test.The boosted carbon resistance can be ascribed to the con-finement of core-shell structure and to the transfer of electrons from Indium to Nickel in In-Ni intermetallic alloys due to the smaller electronegativity of In.Both the silica shell and the increase of electron cloud density on metallic Ni can weaken the ability of Ni to activate C-H bond and decrease the deep cracking process of methane.The reaction over the confined InNi intermetallic alloy nanocata-lyst was conformed to the Langmuir-Hinshelwood (L-H) mechanism revealed by in situ diffuse reflec-tance infrared Fourier transform spectroscopy (in-situ DRIFTS).This work provides a guidance to design high performance coking resistance catalysts for methane dry reforming to efficiently utilize these two main greenhouse gases,
其他文献
Carbonate-modified metal-support interfaces allow Ru/MnCO3 catalyst to exhibit over 99% selectivity,great specific activity and long-term anti-CO poisoning stability in atmospheric CO2 methanation.As a contrast,Ru/MnO catalyst with metal-oxide interfaces
Photocatalytic production of hydrogen peroxide (H2O2) has attracted much attentions as a promising method for sustainable solar fuel.Here,we demonstrate that trace water can drastically boost high-efficiency photocatalytic production of H2O2 with a record
Recently,there has been renewed interest in interface engineering as a means to further push the perfor-mance of perovskite solar cells closer to the Schockly-Queisser limit.Herein,for the first time we employ a multi-functional 4-chlorobenzoic acid to pr
Exploring highly foldable batteries with no safety hazard is a crucial task for the realization of portable,wearable,and implantable electric devices.Given these concerns,developing solid-state batteries is one of the most promising routes to achieve this
Tantalum nitride (Ta3N6) is a very promising photoanode material due to its narrow band gap (2.1 eV)and suitable band alignment for solar water splitting.However,it suffers from severe photocorrosion during water oxidation.In this work,it was found that s
Photodeposition is widely adopted for implanting metal/metal oxide cocatalysts on semiconductors.However,it is prerequisite that the photon energy should be sufficient to excite the host semiconductor.Here,we report a lower-energy irradiation powered depo
Molybdenum sulfide (MoS2) with well-designed porous structure has the potential to be great electrode materials in sodium-ion batteries due to its high theoretical capacity and abundant resource,however,hindered by its intrinsic low conductivity and stabi
Photoelectrochemical (PEC) water-splitting using solar energy holds great promise for the renewable energy future,and a key challenge in the development of industry viable PEC devices is the unavailability of high-efficient photoanodes.Herein,we designed
Poly(ethylene oxide) (PEO) and its derivatives based gel polymer electrolytes (GPEs) are severely limited in advanced and safe lithium-ion batteries (LIBs) owing to the intrinsically high flammability of liquid electrolytes and PEO.Directly adding flame r
The quality of MAPbI3 film prepared by solvent engineering process highly depends on environment and antisolvent control.Here,we provided a simple methylamine chloride (MACl) solution treatment using a two-step process to enlarge the perovskite crystal gr