杂交中稻蓄留再生稻的适宜收割期

来源 :四川农业科技 | 被引量 : 0次 | 上传用户:qiuzhilv
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
近几年来,再生稻以它独特的省种、省工、节水、生育期短、日产量和经济效益高等优点而在水稻生产上大面积应用,并逐渐形成一种耕作制度。据统计,我省1989年杂交中稻收后蓄留再生稻600多万亩,亩产100公斤左右,总产近6.5亿公斤稻谷,成为增加全省粮食产量的重要途径。在再生稻生产上,杂交中稻何时收割既不影响头季稻产量,又有利于休眠芽多发,提高再生稻单产,有多种提法。本文在深入研究分析这一问题的基础上,提出了杂交中稻蓄留再生稻头季稻的适宜收割期和确定方法。 1.头季稻不同时期收割植株营养状况在其它处理相同的条件下,试验设头季稻齐穗后22天、25天、28天、31天和34天五个处理(下简称处理Ⅰ、Ⅱ、Ⅲ、Ⅳ、Ⅴ);结果看出,随头季 In recent years, ratooning rice has been applied extensively on rice production due to its unique advantages of provincial species, provincial labor, water saving, short growth period, high daily output and economic benefits, and gradually formed a farming system. According to statistics, more than 600 million mu of regenerative rice were collected and collected in 1989 after the hybrid rice was harvested in the province. About 100 kilograms of mu was produced per mu and the total output was nearly 650 million kilograms of rice. This has become an important way to increase grain output in the whole province. In ratoon rice production, when hybrid rice harvest does not affect the yield of the first season rice, but also conducive to multiple occurrence of dormant buds and improve the yield of ratoon, there are a variety of references. Based on the deep research and analysis of the problem, this paper proposed the suitable harvesting period and the determination method of the first crop of ratoon rice with ratoon rice. The results showed that: (1) The nutritional status of the first season paddy harvested at different periods Under the same conditions of other treatments, five treatments of 22, 25, 28, 31 and 34 days after the heading of the first season paddy were conducted, Ⅱ, Ⅲ, Ⅳ, Ⅴ); The results show that with the first season
其他文献
本文综述了应变天平单元校和多元校两种方法的静校结果,以及运用两种方法进行标模试验的结果,并通过比较对开展天平校准方法的研究提出了一定的见解。 This paper summarize
会议
该文建立了两种不同结构形式的平膜片应变式压力传感器的动态数学模型。对不带管腔的情况,采用同时辩识模型阶次和参数的方法;对带管腔的情况采用了共振峰提取的方法。文中同时
介绍了应用应变梯度理论研究界面问题的一些结果,基于偶应力理论和梯度塑性理论,揭示了在界面附近,尤其是在剪切载荷作用下,存在边界层效应。对于不同情形,给出了应力、应变的连界
该文介绍了应用应变梯度理论研究界面问题的一些结果,并对考虑转动梯度的破坏准则和考虎应变梯度的压电理论进行了初步探讨。
该文介绍了新近提出的三种应变梯度塑性本构模型:CS应变梯度塑性理论一偶应力理论、SG应变梯度塑性理论和基于细观机制的应变梯度塑性理论(MsG),并对它们在断裂力学中的应用进行
该文叙述了冰样压缩试验机研制过程中,参数和工作形式的确定及其元件的选取。并且说明了一些关键部位的调试与加工技巧,这些设计原理、调试与加工技巧不仅仅可以使用在冰压机上