BeiDou B1I/B3I Signals Joint Tracking Algorithm Based on Kalman Filter

• 作 者: LYU Chade ZENG Qingxi XU Rui GAO Chang QIU Wenqi
• 机 构: College of Automation Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 211106,
• 出 处: 南京航空航天大学学报（英文版）
• 发表日期: 2019年6期
• 关键词: BeiDou B1I/B3I dual-frequency signals joint tracking Kalman filter

Dual-frequency satellite positioning receivers are widely used because they can eliminate ionospheric delayand solve the full-circumference ambiguity quickly.However,in traditional dual-frequency receivers,the relevance of dual-frequency signals are not considered,and,with no improvement imposed to the tracking loop,two independent tracking loops are used to achieve the tracking of dual-frequency signals.In this paper,the BeiDou dual-frequency signals joint tracking algorithm based on Kalman filter is proposed for the tracking of BeiDou B1I and B3I dual-frequency signals.Taking the relevance of B1I and B3I signals into consideration,the algorithm adds a Kalman filter between the phase detector and carrier loop filter of the traditional dual-frequency independent tracking loop.The output results of the phase detectors of the B1I and B3I branches are then combined and filtered by the Kalman filter,and the results are input to the carrier loop filters of the corresponding branches.Proved by experiments,the algorithm not only enables the loop to enter a stable tracking state quickly,but also reduces the noise bandwidth of the two loop filters by about 10 Hz with the same tracking performance obtained.