南寧一中教师黄家元 创造新三球仪

来源 :人民教育 | 被引量 : 0次 | 上传用户:lycan95
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
由於陝西張俊德發明「三球儀」的啟發,廣西南寧市一中敎師兼儀器管理員黃東元自己設計創造了一個紙質的「三球儀」,曾在南寧市政展覽會上展出,受到了觀眾一致的贊許。根據武漢大學物理系研究的結果,這一個三球儀有四項優點:(一)可以表示太陽的自轉,地球的自轉與公轉,月亮的自轉與公轉,這些轉動的週期都正確地表示了出來,可以明瞭年、月、日、時興三球相對位置的關係。(二)地軸常指一定方向與公轉面成正確角度,並突出地表示了公轉過程中遠日、近日的情況,使觀察者可以明暸四季的成因。(三)可以表示月的盈缺,並突出地表示了黃白交角,避免了一般「三球儀」所存在的每逢初一、十五便有日、月蝕發生的錯誤現象。(四)可以表示月球常以同一面向著地球的現象。這 Inspired by Zhang Junde’s invention of “three-ball instrument” in Shaanxi Province, Huang Dongyuan, a middle school teacher and instrumentation administrator in Nanning, Guangxi Province, designed and created a paper-based “three-ball instrument” that was exhibited at the Nanning Municipal Exhibition and was subjected to The audience’s unanimous approval. According to the results of the research conducted by the Department of Physics, Wuhan University, this three-sphere instrument has four advantages: (1) It can indicate the rotation of the sun, the rotation and revolution of the earth, the rotation and revolution of the moon, and the periods of these rotations are correctly expressed , You can understand the year, month, day, fashionable relationship between the relative position of three balls. (2) The geodetic axis usually refers to a certain direction and the plane of revolution is a correct point of view, and prominently expressed the revolution in the far days, the recent situation so that observers can understand the causes of the four seasons. (C) It can represent the deficit of the month and prominently show the angle between the yellowishness and the gregarious. It avoids the erroneous phenomenon of daily and lunar eclipse occurring in the ordinary “three-ball” during the first and fifth days. (D) can be said that the moon often the same face the phenomenon of the Earth. This
其他文献
日照1580mm热连轧加热炉数据跟踪系统具有板坯核对管理,装炉跟踪管理和出炉跟踪管理。目的是保证生产计划数据和实际板坯一一对应,出炉完成时为过程控制模型计算提供准确的板坯
会议
本文介绍了日照钢铁公司1580mm 热连轧生产线三电控制系统的组成和投入运行后的数据。该系统实现了立辊液压AWC 和SSC 控制,粗轧机和精轧机液压AGC 控制,最新的无芯热卷箱控制,
会议
含铬高硅TRIP钢室温变形时通常具有较长的屈服平台,因此在成形过程中零件表面容易出现褶皱等缺陷。为了解决这个问题,本文采用预拉伸试验研究了不同预拉伸变形量对TRIP 钢屈服
会议
通过OM、SEM、TEM、EBSD 等手段研究了针状铁素体+准多边形铁素体的复合组织的F40 级船板钢的低温冲击韧性及其机理,由于这种复合组织之间界面均为大角晶界,晶界上存在大量被细
在Gleeble3800热模拟机上对低碳Si-Mn系Q&P钢的热处理工艺进行了试验研究,利用透射电镜进行了微观组织观察和断裂机理分析。采用Matlab 软件预测了室温下能获得最大量稳定残余
会议
随着科学技术的不断进步,人们在通信方面也得到了很大的改变,通过从有线到无线的改变,再从无线到更大的飞跃,人们都在不断的追求,对于现在发展中,无线通信也是表现出某些值得
中医学“整体观念”和“治未病理念”在疾病预防、诊断、治疗及预后康复管理方面均发挥巨大作用.在现代科学技术及西医学飞速发展的今天,中医药现代化也受到了越来越多的关注
期刊
利用盐浴方法进行低碳Si-Mn系Q&P钢的热处理,采用X射线衍射仪,研究了热处理后试样中残余奥氏体量。研究表明:Q&P钢中残余奥氏体的存在提高了钢的塑性;在Q&P工艺中,当配分温度较低
利用热模拟实验机,建立了低碳微合金钢未变形和变形奥氏体的CCT 曲线。利用光学显微镜分析研究了奥氏体变形、冷却速度对连续冷却相变及显微组织的影响。结果表明,变形促进了奥
会议
利用金相显微镜、X-射线衍射等方法,研究了0.17C-1.4Si-1.6Mn-0.5Cu 冷轧TRIP 钢等温淬火温度对组织和力学性能的影响。结果表明,实验钢在840℃退火120s 和420℃等温240s 处理