论文部分内容阅读
用线切割机床加工10米长,0.3毫米厚的不锈钢带。可将不锈钢带弯成如图,插入转轴的槽中,并利用转轴上两端的孔,穿上小轴,将钢带紧紧地缠绕在转轴上,然后装入套筒里,利用钢带的弹力自动涨紧。这样方可固定在数控线切割机床上进行加工。切割时转轴、套筒、钢带一道切割,保证所需规格的各种宽度尺寸L、L_1……(见图)。但必须注意:套筒的外径须在数控线切割机床的加工范围以内,否则无法进行加工。
Wire cutting machine processing 10 meters long, 0.3 mm thick stainless steel. Stainless steel can be bent into the figure, inserted into the shaft slot, and the use of the shaft at both ends of the hole, put on a small shaft, the steel tightly wrapped around the shaft, and then into the sleeve, the use of steel Elastic tension automatically. This can be fixed in CNC wire cutting machine for processing. Cut the shaft, sleeve, strip cutting, to ensure the required specifications of the various width dimensions L, L_1 ...... (see photo). However, it must be noted that the outer diameter of the sleeve must be within the machining range of the NC WEDM, otherwise the machining can not be performed.