论文部分内容阅读
我厂一烧车间天车组,有两台10t抓斗天车,每日进行抓卸车作业,时而磨断抓斗提升钢丝绳。为更换钢丝绳和剁钢丝绳头,需要打“斜铁”。建厂23年来,一直是用一根小钢钎制做“斜铁”,但打“斜铁”要用手直接握住小钢钎,打大锤时一旦走锤,轻则跑锤,重则打伤握钢钎的手。今年,该组工会劳动保护监督检查小组,在全组开展了
I plant a burning workshop crane group, there are two 10t grab crane, daily grasping unloading operations, sometimes grinding grab to enhance the rope. In order to replace the wire rope and rope cut rope, you need to play “oblique iron.” For 23 years since the founding of the factory, it has been used to make “diagonal iron” with a small steel rod. However, if the “diagonal iron” is to be held by hand, the small steel rod can be directly gripped. When the hammer is struck, The hand holding the drill is injured. This year, the group labor protection supervision and inspection team, carried out in the whole group