论文部分内容阅读
有时,生产即将开始,但所需刀具尚未到货,因此外购刀具的交货期妨碍了生产。解决这种问题的办法之一,是用户利用工具厂提供的通用组件,能自行装配所需的刀具。事实上,工具厂久已采用了通用组件装配法生产各种刀具(图1)。在机夹刀具制造中,早就应用了“刀垫”,即切削刀片下面一般都加有垫片或垫块(称作刀垫),而不直接紧固在刀体上,其目的是,如果刀片破坏,则可保护刀体尽量不受损伤。进一步发展,还出现了结构小巧的刀垫或刀
Sometimes, production is about to begin, but the required tools have not yet arrived, so the delivery of outsourced cutlery hinders production. One way to solve this problem is to use the common components provided by the tool factory to assemble the required tools. In fact, the tool shop has long used a common component assembly method to produce a variety of tools (Figure 1). In the machine tool manufacturing, the “knife pad” has been used for a long time, that is, a gasket or a pad (called a knife pad) is usually added under the cutting blade instead of being fastened directly to the knife body. If the blade is damaged, you can protect the body from damage as much as possible. Further development, there has also been a small structure of the knife or knife