【摘 要】
：
An experimental study has been carried out to investigate the effect of microstructure on sliding wear behavior of Fe-Al coatings and Fe-Al/WC composite coating
【机 构】
：
National Key Laboratory for Remanufacturing
论文部分内容阅读
An experimental study has been carried out to investigate the effect of microstructure on sliding wear behavior of Fe-Al coatings and Fe-Al/WC composite coatings produced by high velocity arc spraying (HVAS) and cored wires. After heat treatment at 300℃, 450℃, 550℃, 650℃ and 800℃, the microstructure of the coatings will be changed. The changes of microstructure have obvious effects on the microhardness of the coatings, which may be the most important factor influencing the coatings sliding wear behavior. After heat treated at 450℃-650℃, increasing of the amounts of iron aluminides (including Fe3Al and FeAl ) and dispersion strengthening of Fe2W2C and Fe6W6C will lead to a rise of microhardness of the coatings. Increasing the microhardness through heat treatment would improve the sliding wear resistance of the iron aluminide based coatings coatings.
其他文献
一、疖与疖病疖(furuncle)俗称疔疮,是单个毛囊及其周围组织的急性化脓性感染.病菌以金黄色葡萄球菌为主,偶可见表皮葡萄球菌或其他病菌.感染发生与皮肤不洁、擦伤、环境温度
从Haun的PZT热力学理论出发 ,给出了PZT四方相区介电常数εr 与晶格畸变c a关系的基本方程 ,并深入地根据相关实验资料和物理图像的合理推论 ,建立了关于晶格畸变c a与介电常
在配电网接地故障定位传递函数法的基础上,提出了一种能够方便应用于多分支配电网接地故障定位的新方法--特征向量法.该方法利用数字信号处理手段获得具有一定分支结构的配电
为能将隧道薄膜与光存储分层媒质看成一个整体膜系分析固体浸没透镜的透过率,将Abeles的光波在介质分层媒质中的传播理论和分析方法扩展到了隧道薄膜。给出隧道薄膜的特性矩
A duplex surface treatment involves the sequential application of two surface technologies to produce a surface composition with combined properties. A typical
当成像系统与反舰导弹的运动方向在同一条直线上时,无法采用基于运动轨迹分析的时间滤波算法。针对这一问题,提出了一种基于小波变换的空间滤波与基于像素灰度值变化检测的时
固相反应法和脉冲电流直接通电烧结法制备了CoSb3/C60复合材料,其组分通过粉末x射线衍射法确定,SEM分析表明C60颗粒是均匀地分布在CoSb3基体中.在300-800K范围内测量了材料的
Free-standing diamond films, deposited using Dc Arc Plasma Jet CVD method onto graphite substrates with titanium interlayers, have been investigated. The Ti int
为发展可适用于纳米晶体力学模拟的高效率并行算法,构建了从晶体生成、计算到显示的分子动力学(MD)模拟系统.MD算法基于经典的对势和多体势上的Verlet算法,并行格式基于Linke
The thermal stability of an ADI has been studied by isothermal aging at 350℃ for 150 hours, measuring the amount of retained austenite and its carbon content b