【摘 要】
：
The Monte Carlo probability (MCP) model, which has been used for official tropical cyclone (TC) warnings to the public by the United States' National Hurricane
【机 构】
：
Department of Atmospheric Sciences,University of Utah,Salt Lake City,UT 84112,USA;Institute of Atmos
论文部分内容阅读
The Monte Carlo probability (MCP) model, which has been used for official tropical cyclone (TC) warnings to the public by the United States\' National Hurricane Center (NHC), can estimate the probability of wind speed in the vi-cinity of a TC during the forecast period. It has been successful in the operational environment for many years. However, due to its strong dependence on a given forecast track (e.g., forecast from the NCEP Global Forecast Sys-tem), the MCP model may generate a poor probability map for TCs near landfall. In this study, we proposed and tested a modified MCP method for TC forecasts near landfall. We first adjusted the MCP model by adding limits to the direction angle and motion distance to deal with the substantial change in TC moving direction and the low wind speeds during landfall. Then, we combined ensemble probability maps generated from ECMWF, United Kingdom Met Office (UKMO), and NCEP ensemble forecasts, obtained from The International Grand Global Ensemble (TIGGE), into the MCP model to configure a modified MCP model. Wind speed probability maps for the 0–120-h forecast from both the original and modified MCP models are compared. It is found that the modified MCP model can provide a better wind speed probability map during landfall, especially at wind speeds of 20–64 kt near TC landfall. The res-ults from this study prove the benefits of combining the MCP model with ensemble forecasting in potential applica-tions for improved TC forecasts.
其他文献
采用射频(RF)和单极中频直流脉冲磁控溅射方法,在玻璃基板上制备了(Ti/ZnO)N成分调制纳米多层膜,并研究了调制周期数对其结构及透光导电性能的影响。通过X射线衍射、拉曼光谱、原子力显微镜、紫外可见吸收光谱以及霍尔效应测试结果表明:(Ti/ZnO)N成分调制纳米多层膜以(002)取向的纤锌矿型ZnO结构为主,具有明确的成分调制结构,各Ti层和各ZnO层厚度均匀连续,各界面平整且无明显扩散。在可见光范围的平均透光率大于85%,电阻率最小可达到2.63×10-2Ω·cm。
采用固相反应制备了不同浓度Mn4+掺杂的硅酸锆粉末,研究了Mn4+对硅酸锆光致发光性能的影响。采用XRD表征ZrSiO4∶Mn4+的结构,结果显示在1400℃粉末已被完全合成。研究了不同掺杂浓度下ZrSiO4∶Mn4+粉末的光谱性能,在0.3%Mn4+掺杂浓度(摩尔分数)下,其发光性能最好。在激发谱中,位于363 nm的峰是由O2-
多齿配体2-咪唑乙酸(Hima)、4,4’-连吡啶分别与金属盐Pb(NO3)2和AgNO3反应,得到[Pb 2(4,4’-bipy)(ima)(NO3)3]n(1,3D framework)和[Ag4(4,4’-bipy)3(ima)2(NO3)2(H2O)2]n(2,3D framewo
通过引入V物种对二氧化钛负载的铁基催化剂进行改性,制备出了FeV/TiO 2催化剂,并与未改性的铁基催化剂进行比较,通过X射线衍射(XRD)、拉曼光谱测试(Raman)、比表面积测试(BET)、紫外-可见-近红外漫反射光谱测试(UV-Vis-NIR)、氨气程序升温脱附(NH 3-TPD)以及氢气程序升温还原(H2-TPR)等一系列测试对催化剂进行了表征。结果表明,引入V后的催化剂呈现出以FeVO4为主相的状态,并存在大量的酸性位点而具有较强的表面酸性,Fe、V物
Studies on tropical cyclone (TC) inner-core size have become increasingly active in recent years. However, few studies have investigated the trend of TC inner-c
以石墨为基底,五水合四氯化锡为锡源,氢氧化钠为沉淀剂,采用一步水热法合成了SnO2/石墨分级纳米异质结构。利用FESEM、XRD、EDS、Raman等对SnO2/石墨分级纳米异质结构进行了形貌、结构和成分表征。研究发现,结晶良好的SnO2纳米线首先组装成SnO2纳米棒,纳米棒进一步组装成直径约450 nm的花状结构,并均匀生长在石墨片上,呈现分级结构。用循环伏安法、恒流充放电循环法测试了分级纳米异质结构的电化学性能,结
采用液滴外延法在GaAs(001)衬底上生长In液滴,利用原子力显微镜(AFM)对不同衬底温度下生长的样品进行表征,观察其表面形貌。研究表明In液滴的生长对衬底温度十分敏感,随着衬底温度的升高,液滴密度逐渐减小,液滴尺寸逐渐增大。分析了In液滴在不同衬底温度形成过程的物理机制,解释了该实验现象的原因。根据成核理论中最大团簇密度与衬底温度之间的关系,拟合计算出In液滴密度与衬底温度满足的函数关系为n x=5.17 exp(0.69 eV/kT)。
对PEDOT∶PSS(聚(3,4亚乙二氧基噻吩)-聚(苯乙烯磺酸))薄膜与Mg、Al和Ag三种金属接触后的I-V特性曲线进行了测试分析,发现Mg和Al与PEDOT∶PSS薄膜接触后呈现高电阻特性,可以起到绝缘隔离层的作用。在此基础上,以PEDOT∶PSS作为空穴传输层,以LiF作为电子传输层,以PEDOT∶PSS与Mg/Al的接触作为隔离层,不采用光刻工艺,设计制备了只需一次掩膜工艺的背接触太阳电池。通过在PEDOT∶PSS上采用热丝氧化升华技术制备MoO x层,通过优化LiF薄膜的厚度,在抛光硅片上初步
在适宜的时间和科学的用量下施用氮肥是提升黄淮海地区夏玉米产量的关键。本试验于2018—2019年选用京农科728(JNK728,氮高效品种)和郑单958(ZD958,高肥品种)2个玉米品种为试验材料,采用滴灌施肥技术,分别设置4个氮肥用量(0、150、250、350 kg/hm2)和4个施氮时期(苗期、6叶期、12叶期、吐丝期),探究不同氮肥运筹模式对夏玉米产量及产量构成因素的影响。结果表明JNK728在150 kg/hm2施氮量下产量最高,ZD958在250
本文介绍了一种利用[2+1]环加成反应构筑螺环化合物的有效方法。实验以噻唑烯酮和芴硫叶立德前体盐为反应底物,以Cs2CO3作为碱,在甲苯中常温下反应1 h即可获得目标产物;实验结果表明,不同类型的噻唑烯酮均可与芴硫叶立德在室温下顺利反应,以41%~97%的产率和优秀的非对映选择性获得相应的双螺环产物。本实验的意义在于首次利用芴硫叶立德与噻唑烯酮发展了一种新型的高效合成双螺环化合物的方法,这类噻唑类螺环化合物在抗菌、病毒防治、合成医药中间体等方面有着潜在的应用价值