《鞍钢宪法》指航向 技术革新创奇迹

来源 :焊接 | 被引量 : 0次 | 上传用户:yao252373
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
文化大革命前,由于我厂一小撮走资派和资产阶级技术权威,把持着技术领导权,他们竭力推行叛徒、内奸、工贼刘少奇的“专家治厂”、“洋奴哲学”、“爬行主义”等反革命修正主义路线,疯狂反对毛主席的“鞍钢宪法”,提出什么“搞技术革命不能超过五元钱”等等谬论,压制和破坏了广大工人大搞技术革新的群众运动。无产阶级文化大革命一声春雷,彻底摧毁了大叛徒刘少奇的反革命修正主义路线。我们高举“鞍钢宪法”的伟大红旗,以两论(矛盾论,实践论)为动力,大搞技术革新和技术革命,彻底改变我厂焊接生产的落后面貌。最初,我厂制作油罐的封头完全用手工操作,工人们要在几十度高温下进行笨重的体力劳动。这样,不但劳动强度大,而且质量很差。为了解决这个问题,我们遵照毛主席关于“自力更生,奋发图强”的伟大教导,组成了以老工人为主体的、有技术人员、革命干部参加的三结合的技术革新小组,经过十个月的艰苦奋战,自行设计、制造成功一 Before the Cultural Revolution, because of the handful of capitalists and capitalist technical authorities in our factory, they took the lead in technology. They tried their best to promote the “expert factory management”, “slaves philosophy” and “repressionism” of traitors, traitors and thieves “Such counterrevolutionary revisionist lines, crazy opposition to Chairman Mao’s” Ansteel Constitution “, put forward what” technological revolution can not be more than five dollars, “and so on fallacy, suppress and undermine the vast number of workers engaged in technological innovation in the mass movement. As soon as the Great Proletarian Cultural Revolution broke out, Chunlei completely destroyed the counterrevolutionary revisionist line of the great traitor Liu Shaoqi. We hold high the great red banner of ”Ansteel Constitution“ and take the two arguments (contradictory theory and practice theory) as the driving force. We vigorously promote technological innovation and technological revolution and completely change the backwardness of welding production in our factory. Initially, the head of the tank made by our factory was completely operated by hand, and the workers carried out cumbersome manual labor at tens of degrees of temperature. In this way, not only labor-intensive, but also poor quality. In order to solve this problem, we followed the great teachings of Chairman Mao on ”self-reliance and work hard to make progress" and formed a three-pronged technical innovation group with old workers as the main body, including technicians and revolutionary cadres. After ten months of hard work , Designed and manufactured successfully
其他文献
近年,尿素合成塔的安全运行愈加得到重视,检漏技术也备受关注,怎样做到及时发现问题,避免重大安全事故的的发生,成为一个重要的课题,四川美丰化工股份有限公司尿素装置共有11台高压
尿素合成塔是尿素装置的关键设备,原料氨与二氧化碳的反应主要在该塔内进行,由于其处于高温、高压和强腐蚀性介质(氨基甲酸铵、液氨、二氧化碳)的工作条件下,如果使用、维护不当
会议
尿素2#系统采用CO2汽提塔法生产工艺,其高压换热设备CO2汽提塔是大连金重机械厂制造,运行以来,γ液位计源检漏孔发生两次泄漏,造成停车、排塔处理。本文介绍了CO2汽提塔的腐蚀情况
1,4-丁二醇(BDO)主要用于制造聚对苯二甲酸丁二醇酯(PBT)、四氢呋喃(THF)、γ-丁内酯(GBL)、聚氨酯(PU)等,也可用于制造维生素B6、农药、除草剂以及多种工艺过程的溶剂、润滑剂
会议
双氧水是以2--乙基恩醌作为载体.用磷酸三锌及重芳烃作为溶剂.经共氢化、氧化、萃取、后处理等工序后生产工业用含量为27.5%双氧水,其中氧化工序是用常温空气直接氧化.大量的空
会议
本文对IPv6组播技术的原理进行了详细分析,实现了在校园网IPv6环境下,配置组播路由器的PIM、MLD协议,利用VLC开源软件发布和访问视频,搭建校园网视频组播系统。 This paper
本文简要论述了湖南金信化工有限公司根据国家标准的分析原理,并且提出了简易快速测定活性炭硫容量的方法.
本文对2002年以来DDS脱硫技术的工业应用作一概括总结,介绍成功经验同时也对不足之处进行了认真剖析,并对DDS脱硫技术在使用过程中应该注意的几个问题做了简要阐述.
对于H2S和CO2的脱除可以采用许多不同的方法,这里有一定的界限条件,例如压力、H2S与CO2的浓度,其他痕量杂质的存在(如COS)、产品要求的纯度等,以确定采用何种方法为适宜.本文论述
河北天宝化工股份有限公司合成氨生产能力为100 kt/a,主要产品有甲醇、液氨、碳铵.造气工段现有造气炉9台,其中Φ2610 mm型8台,Φ2400 mm型1台.该公司选用了山东博山化肥设备厂