新生儿远程医疗

来源 :中国当代儿科杂志 | 被引量 : 0次 | 上传用户:wangya110
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
There is a widespread shortage of physicians worldwide, especially in rural areas. This shortage is more prevalent when it comes to subspecialty care, even in developed countries. One way to provide access to specialty care is using technology via telemedicine. Telemedicine has evolved over the last two decades, and its use is becoming widespread in developed countries. However, its use in the neonatal population is still limited and practiced only in some centers. It is now apparent that telemedicine can be successfully used in the neonatal population for screening premature infants for retinopathy of prematurity, congenital heart disease, bedside clinical rounds, neonatal resuscitation with the support of a tertiary care hospital, and family support. This avoids unnecessary transfer and appears to provide the same quality of care that the baby would have received at the tertiary care facility. This approach also improves family satisfaction, as the baby and the mother are kept together, and reduces the cost of care. This review focuses on the use of telemedicine in neonatal care, concentrating on the main areas where telemedicine has been shown to be successful and effective, including the status of telemedicine in China.
其他文献
摘 要:在空调系统中,噪声主要源于声源与二次噪声,而噪声产生的具备原因相对复杂,从设计、施工、材料设备选用到后期的运行管理,一旦存在不完善之处,就会致使空调系统在实际运行的过程中产生噪音。而为了实现对空调系统噪声的有效控制,本文从设计角度出发,对空调系统噪声控制所存在的问题进行的分析,并提出了相应的控制策略,以供参考。  关键词:空调系统;噪声控制;若干问题;对策;分析  中图分类号:TU83 文
针对千米深井巷道围岩大变形控制难题,提出了支护-改性-卸压“三位一体”协同控制技术,其中要求注浆改性材料具有“高渗透、高强度、高黏结”性能.“高渗透”可以通过减小粒
本文通过对荣华二采区10
期刊
工程领域广泛存在各种旋转机械,例如行星齿轮传动、液压马达、滚动轴承、永磁电机和超声电机等。该类机械通常呈环状对称构型,由于接触/非接触、均布/离散以及静止/旋转载荷的激励作用,系统将表现出参激振动特征。为了揭示对称拓扑构型与动力性能之间的关系,本文深入研究了关键基本参数对模态特性及动力稳定性的影响。论文主要内容如下:(1)针对旋转对称环状结构的参激振动问题,在惯性坐标系下应用Hamliton原理建
ICT是工业用计算机断层成像技术的简称,它能在对检测物体无损伤的条件下,以二维断层图像的形式,清晰、准确、直观地展示被检测物体内部的结构、组成、材质及缺损状况,被誉为
目的 观察双侧标准大骨瓣开颅去骨瓣减压术与双额冠状切口开颅去骨瓣减压术治疗重型颅脑损伤患者临床疗效.方法 选取我院74例重型颅脑损伤患者,按照手术方法分组,各37例.双额
离心式压缩机作为对气体的增压工具,在国民经济各个领域发挥着至关重要的作用。其本身密封性能的好坏不仅直接关联到其功能的发挥,有时甚至会影响整个装置的正常生产,因此对离心式压缩机的工作性能进行研究并选择合适的轴端密封形式具有实际的经济价值。螺旋槽干气密封作为一种新型的无接触轴端密封,用它来作为旋转机械中的气体介质的密封形式,其具有泄漏量少、寿命长、磨损小、功耗低、操作简单、维修方便、可靠性及经济性高等