论文部分内容阅读
电解射流加工是一种高压电解加工过程,其工具是一股冲击着工件的稳定的电解液射流。其加工效率比用绝缘的金属管作电极,用盐类电解液的低电压加工和用酸类电解液、较高电压的加工工艺要高。它是由一只特制的喷嘴产生小直径的电解液射流,它在几厘米以外还是稳定的。当电压为500伏时,用高电导率的酸性电解液,在射流的横断面上可以获得约3安培/毫米~2(2000安培/英吋~2)的电流密度。工件被射流冲击的地方,金属由于气、液相中的复杂的电化学现象而被蚀
Electrolytic jet machining is a high-pressure electrolytic machining process whose tool is a stable jet of electrolyte that impacts the workpiece. Its processing efficiency than the insulated metal tube for the electrode, the salt electrolyte with low voltage processing and acid electrolyte, higher voltage processing technology to be high. It produces a small diameter jet of electrolyte from a specially made nozzle that is stable a few centimeters away. When the voltage is 500 V, a current density of about 3 A / mm 2 (2000 A / in 2) can be obtained on the cross section of the jet using a highly conductive acidic electrolyte. Where the workpiece is impacted by the jet, the metal is etched due to the complex electrochemical phenomena in the gas and liquid phases