论文部分内容阅读
根据中国国家标准化管理委员会“2006年制修订国家标准项目计划”(项目编号:20060181—T—604),由天津工程机械研究院等单位组成标准起草小组,负责制定推荐性国家标准《挖掘装载机试验方法》。标准起草小组按GB/T1.1—2000和GB/T20000.2—2001的规定,编制了GB/T13751—2008,代替GB/T13751—1992《挖掘装载机可靠性试验方法》和GB/T10170—1988《挖掘装载机技术条件》第4章“型式试验”内容,以使标准更能适应技术发展的变化。通过直接引用有关试验方法的现行国家标准,有助于提高产品试验水平,促进挖掘装载机的技术进步。
According to China National Standardization Management Committee “2006 revision of national standard project plan ” (project number: 20060181-T-604), a standard drafting group composed of Tianjin Engineering Machinery Research Institute and other units is responsible for formulating recommended national standards Loader test method. “ Standard drafting group according to GB / T1.1-2000 and GB / T20000.2-2001 provisions, the preparation of the GB / T13751-2008, instead of GB / T13751-1992 ”Backhoe Loader Reliability Test Method“ and GB / T10170- 1988 ”Backhoe Loader Technical Conditions“ Chapter 4 ”type test " content, so that the standard can better adapt to technological change. By directly referring to the current national standards on test methods, it is helpful to improve the level of product testing and to promote the technical progress of backhoe loaders.