论文部分内容阅读
1.波导管的设计要求 如图1所示,波导管系经拉制而成。矩形方孔内表面粗糙度为R_α0.2。在加工两端面的过程中不能划伤内表面,不得使波导管发生变形现象。
1. Waveguide design requirements shown in Figure 1, made of drawn waveguide system. Rectangular square hole surface roughness R_α0.2. In the process of processing both ends of the inner surface can not be scratched, the waveguide shall not be deformed.