论文部分内容阅读
The milling behavior of poly(amide imide),which serves as a prototypical hydrophilic high-performance polymer with a high glass transition temperature,was investigated.Various milling conditions(milling times up to 7h,stirrer tip speeds of 3.4-4.9 m/s,and mass concentrations of 5-20%) were tested,and particle sizes as low as d_(50,3) ~3μm were obtained.The milling was performed at 11℃ in an attritor.Differential scanning calorimetry and thermogravimetric analysis were performed before and after milling to investigate the effect of milling on the glass transition temperature and on the decomposition behavior of the polymer.The suspension obtained after milling was observed to be stable without the addition of stabilizers or the adjustment of the pH value,and no negative effect of milling on the polymer properties was observed.The attritor technique proved to be an adequate and efficient milling tool for the production of micrometer-sized high-performance polymer suspensions.
The milling behavior of poly (amide imide), which serves as a prototypical hydrophilic high-performance polymer with a high glass transition temperature, was investigated. Volume milling conditions (milling times up to 7h, stirrer tip speeds of 3.4-4.9 m / s , and mass concentrations of 5-20%) were tested, and particle sizes as low as d_ (50,3) ~ 3μm were obtained. The milling was performed at 11 ° C in an attritor. Differential scanning calorimetry and thermogravimetric analysis were done before and after milling to investigate the effect of milling on the glass transition temperature and on the decomposition behavior of the polymer. The suspension obtained after milling was observed to be stable without the addition of stabilizers or the adjustment of the pH value, and no negative effect of milling on the polymer properties was observed. attritor technique proved to be an adequate and efficient milling tool for the production of micrometer-sized high-performance polymer suspensions.