Two-stage on-board optimization of merging velocity planning with energy management for HEVs

来源 :控制理论与技术(英文版) | 被引量 : 0次 | 上传用户:a4936543
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
This paper 1proposes a two-stage hierarchy control system with model predictive control (MPC) for connected parallel HEVs with available traffic information.In the first stage,a coordination of on-ramp merging problem using MPC is presented to optimize the merging point and trajectory for cooperative merging.After formulating the merging problem into a nonlinear optimization problem,a continuous/GMRES method is used to generate the real-time vehicle acceleration for two considered HEVs running on main road and merging road,respectively.The real-time acceleration action is used to calculate the torque demand for the dynamic system of the second stage.In the second stage,an energy management strategy (EMS) for powertrain control that optimizes the torque-split and gear ratio simultaneously is composed to improve fuel efficiency.The formulated nonlinear optimization problem is solved by sequential quadratic programming (SQP) method under the same receding horizon.The simulation results demonstrate that the vehicles can merge cooperatively and smoothly with a reasonable torque distribution and gear shift schedule.
其他文献
钙钛矿结构稀土锰氧化物的研究始于1950年,由于这类材料表现出来的超大磁电阻效应在提高磁存储密度、磁敏传感器、磁制冷和红外线成像等方面都有着诱人的应用前景,因而受到人们
Al-Zn-Mg-Cu超高强铝合金已广泛应用于航空航天、兵器装备和交通运输等领域。研究者对该系铝合金进行了广泛研究。然而弥散相 E(Al18Cr2Mg3)的性质、η(MgZn2)相的非均匀析出
Aiming at the actuator time delay caused by the drive-by-wire technology,a novel manoeuvre stability controller based on model predictive control is proposed fo
文章旨在使用脉冲电源对含酚废水进行电解。本文从电极材料、处理时间、pH、氯化钠浓度、硫酸钠浓度、初始电流、脉冲频率、电压、循环速率等参数方面设计实验以对苯酚的脱除
例:如右图所示,小麦在不同的光照条件下,整体表现出的吸收O2和释放O2量(任意单位)的状况.那么在相同条件下,分别绘出人参、玉米两种植物其整体表现的吸收O2和释放O2状况的曲
随着社会的快速发展,传统的畜禽散养模式与耕地资源的矛盾日益凸显,由此带来的环境污染也日趋严重。发酵床养殖模式中,畜禽的一切生命活动都是在垫料上进行,垫料的管理与维护
本论文旨在探索掺杂ⅡB族金属硫化物半导体纳米材料的溶剂热合成新方法、新路线,通过调节掺杂金属离子的浓度,合成了系列带隙可调控的ZnS:Mn, CdS:Mn, ZnS:Cu纳米棒状材料,并初步探讨了其合成机理。所得产物用X–射线衍射(XRD)、透射电镜(TEM)、能谱(EDS)、紫外–可见吸收光谱(UV–vis)及傅立叶转换红外光谱(FTIR)等多种现代分析测试手段进行表征。并以合成的产物为催化剂进
碳纳米管具有优异的力学性能,独特的微观结构,极大的长径比和比表面积,有望成为先进复合材料的理想增强体。 本实验采用模具浇铸法,通过对多壁碳纳米管表面改性,制备了碳纳米管
王羲之的不仅在书法艺术上具有巨大成就,而且在文学价值上也有很高的地位,是一篇文质兼美、千古盛传的名篇佳作,历来被选入高中课本,成为高中生的必背篇目.“文以载道”文学
随着全球经济的飞速发展,对能源的需求越来越大,能源在社会经济发展中占据了非常重要的位置。且前能源中的煤炭、石油、天然气等化石能源是不可再生资源,同时会带来环境问题。而