【摘 要】
：
Combustion kinetics of the hydrochar was investigated using a multi-Gaussian-distributed activation energy model (DAEM) to ex-pand the knowledge on the combustion mechanisms. The results demonstrated that the kinetic parameters calculated by the multi-Gau
【机 构】
：
School of Metallurgical and Ecological Engineering,University of Science and Technology Beijing,Beij
论文部分内容阅读
Combustion kinetics of the hydrochar was investigated using a multi-Gaussian-distributed activation energy model (DAEM) to ex-pand the knowledge on the combustion mechanisms. The results demonstrated that the kinetic parameters calculated by the multi-Gaussian-DAEM accurately represented the experimental conversion rate curves. Overall, the feedstock combustion could be divided into four stages:the decomposition of hemicellulose, cellulose, lignin, and char combustion. The hydrochar combustion could in turn be divided into three stages: the combustion of cellulose, lignin, and char. The mean activation energy ranges obtained for the cellulose, lignin, and char were 273.7–292.8, 315.1–334.5, and 354.4–370 kJ/mol, respectively, with the standard deviations of 2.1–23.1, 9.5–27.4, and 12.1–22.9 kJ/mol, re-spectively. The cellulose and lignin contents first increased and then decreased with increasing hydrothermal carbonization (HTC) temperature, while the mass fraction of char gradually increased.
其他文献
压水反应堆发生失水事故(LOCA)时,应急堆芯冷却系统(ECCS)将过冷的安注水注入到冷管段中,安注水与管道中的蒸汽发生直接接触冷凝,导致温度波动及压力振荡.选用流体体积分数模型、大涡湍流模型和双阻力冷凝模型,在FLUENT平台上对饱和蒸汽与安注水直接接触冷凝过程进行数值模拟,获得直接接触冷凝过程中温度场和压力场的变化情况.结果 表明,冷凝主要发生在汽液界面附近,主管内蒸汽流量的增加能够阻止安注水回流现象发生.
立式涡流空气分级机淘洗区内部结构是影响其流场分布的重要因素之一,采用数值模拟方法对淘洗区内有、无扰流锥两种不同结构下的空气分级机流场分布及颗粒分级效果进行对比分析.数值模拟结果表明:扰流锥可以阻碍旋涡的形成,使得淘洗区简体内气流绝对速度整体变小,高频脉动湍涡数量减少;扰流锥减小了环形区和转笼叶片间通道气流径向的速度波动,使得流场分布均匀,有利于提高分级精度.然而,扰流锥的存在使得气流上升过程中的能量消耗增大,导致气流速度降低.碳酸钙粉体分级实验和离散相模拟结果相吻合,物料分级实验结果表明,当进风口风速29
滚动轴承作为旋转机械设备中的关键部件,影响着设备的可靠性运行.为了智能开展设备维护工作,提高设备的运转效率,提出一种基于互信息(mutual information,MI)的主成分分析(principal component analysis,PCA)(MI-PCA)结合支持向量回归(support vector regression,SVR)的滚动轴承剩余寿命预测方法.首先利用小波包降噪算法剔除原始振动信号中的异常数据点和噪声,并基于降噪数据提取其时域、频域和时频域特征;然后结合特征与剩余寿命的互信息值
主要讨论在带Lévy跳的Vasicek随机利率模型下,当标的资产的价格也由带Lévy跳的模型给出时,用标的资产和零息债券两种计价单位对相应的欧式期权进行定价.计算中主要用到计价单位转换原理,即将风险中性测度下的计算转换到两种计价单位对应的概率测度下进行,得到了双Lévy跳扩散模型下的欧式期权定价公式.
讨论中立型变时滞随机微分方程改进的修正截断Euler-Maruyama(EM)方法的q阶矩强收敛性,并得到收敛速度.结果 表明此方法适用于高度非线性的漂移项和扩散项,且相较于隐式的修正截断EM方法计算量更小,适用范围更广.
The interface characteristics of cyanide tailings are different from those of the raw ore. In this study, valuable elements could not be thoroughly recovered via the flotation of cyanide tailings from Shandong, China. The interface and floatability of the
Current electronic technology based on silicon is approaching its physical and scientific limits. Carbon-based devices have numer-ous advantages for next generation electronics (e.g., fast speed, low power consumption and simple process), that when combin
Selective laser melting (SLM), an additive manufacturing process mostly applied in the metal material field, can fabricate complex-shaped metal objects with high precision. Nickel-based superalloy exhibits excellent mechanical properties at elevated tempe
Reverse flotation desilication is an indispensable step for obtaining high-grade fluorapatite. In this work, dodecyltrimethylammoni-um bromide (DTAB) is recommended as an efficient collector for the reverse flotation separation of quartz from fluorapatite
Tribology, which is the study of friction, wear, and lubrication, largely deals with the service performance of structural materials. For example, newly emerging high-entropy alloys (HEAs), which exhibit excellent hardness, anti-oxidation, anti-softening