论文部分内容阅读
Cutterhead loads are the key mechanical parameters for the strength design of the full face hard rock tunnel boring machine (TBM).Due to the brittle rock-breaking mechanism,the excavation loads acting on cutters fluctuate strongly and show some randomness.The conventional method that using combinations of some special static loads to perform the strength design ofTBM cutterhead may lead to strength failure during working practice.in this paper,a three-dimensional finite element model for coupled Cutterhead-Rock is developed to determine the cutterhead loads.Then the distribution characteristics and the influence factors of cutterhead loads are analyzed based on the numerical results.It is found that,as time changes,the normal and tangential forces acting on cutters and the total torque acting on the cutterhead approximately distribute log normally,while the total thrusts acting on the cutterhead approximately show a normal distribution.Furthermore,the statistical average values of cutterhead loads are proportional to the uniaxial compressive strength (UCS) of cutting rocks.The values also change with the penetration and the diameter of cutterhead following a power function.Based on these findings,we propose a three-parameter model for the mean of cutterhead loads and a method of generating the random cutter forces.Then the strength properties of a typical cutterhead are analyzed in detail using loads generated by the new method.The optimized cutterhead has been successfully applied in engineering.The method in this paper may provide a useful reference for the strength design ofTBM cutterhead.