论文部分内容阅读
第24届国际机床设计与研究会议于1983年8月31日至9月1日在英国曼彻斯特(Manchester)理工学院举行。参加会议的18个国家的代表共130人,我国有7人参加会议,并在大会上宣读了论文。在大会上共宣读了58篇论文,内容分为以下六个方面:1)金属成形与切断;2)切削力、加工性和刀具涂层;3)适应控制和在线监测;4)磨削和特种工艺;5)测量与机床元件设计;6)CAD/CAM、机器人,工件流动与FMS。其中有关金属成形与切断的论文18篇,约占1/3,说明目前国外对金属成形与切断的重视程度。现将会议中发表的有关磨床与磨削方面的论文内容摘要于后。
The 24th International Conference on Machine Design and Research was held at the Manchester Institute of Technology in the United Kingdom from August 31 to September 1, 1983. A total of 130 delegates from 18 countries attended the conference. Seven members of our country attended the conference and read the papers at the conference. A total of 58 papers were presented at the conference and were divided into the following six areas: 1) metal forming and cutting; 2) cutting force, processability and tool coating; 3) adaptive control and on-line monitoring; 4) grinding and Special technology; 5) measurement and machine element design; 6) CAD / CAM, robotics, workpiece flow and FMS. Among them 18 papers about metal forming and cutting, accounting for about 1/3, indicating the current emphasis on the metal forming and cutting off. The summary of the dissertation on grinding machines and grinding is now available at the conference.