论文部分内容阅读
As one of the bases of gradient-based optimization algorithms,sensitivity analysis is usually required to calculate the derivatives of the system response with respect to the machining parameters.The most widely used approaches for sensitivity analysis are based on time-consuming numerical methods,such as finite difference methods.This paper presents a semi-analytical method for calculation of the sensitivity of the stability boundary in milling.After transforming the delay-differential equation with time-periodic coefficients goving the dynamic milling process into the integral form,the Floquet transition matrix is constructed by using the numerical integration method.Then,the analytical expressions of derivatives of the Floquet transition matrix with respect to the machining parameters are obtained.Thereafter,the classical analytical expression of the sensitivity of matrix eigenvalues is employed to calculate the sensitivity of the stability lobe diagram.The two-degree-of-freedom milling example illustrates the accuracy and efficiency of the proposed method.Compared with the existing methods,the unique merit of the proposed method is that it can be used for analytically computing the sensitivity of the stability boundary in milling,without employing any finite difference methods.Therefore,the high accuracy and high efficiency are both achieved.The proposed method can serve as an effective tool for machining parameter optimization and uncertainty analysis in high-speed milling.