棒状零件的自动送料机构

• 作 者: 卫国定
• 出 处: 湖北机械
• 发表日期: 1981年06期
• 关键词: 自动送料 落料 料槽 工作过程 推送 工位 往复直线运动 导轨 毛坯 送料板

1.棒状零件的自动送料机构该机构利用零件(或毛坯)自重落料,零件沿轴向送进,简单易行。其工作过程如下: 料仓1(见图1)底部有等分半圆形开口,分料辊2作间歇旋转运动。料仓中的待送零件3靠自重滑入分料辊的容料槽中,并被送至下方,落入输入导轨4,最后由送料器(图中未示出)将零件推送到相应的工位上去。

1. Rod parts automatic feeding mechanism The use of parts (or rough) blanking their own weight, parts along the axial feed, simple and easy. The working process is as follows: silo 1 (see Figure 1) has a semi-circular opening at the bottom of the sub-sub-roller 2 for intermittent rotation. The parts 3 to be delivered in the silo slide by their own weight into the feed chute of the parting roller and are fed down to the input guide 4 and finally the parts are pushed by the feeder (not shown) to the corresponding The station up.