论文部分内容阅读
蒸发系统●传统的多效蒸发系统:蒸发量大,应用广泛,技术成熟;●热熔型多效蒸发系统:只用于十水芒硝的蒸发,蒸发量小、节能、投资省;●热泵型低温多效负压蒸发系统:蒸发温度低,所有设备均为常压设备。●MVR蒸汽压缩泵型单效蒸发系统:只通少量蒸汽,借压缩机将二次蒸汽饱和温度提高。闪蒸干燥机●解决了高温传动及密封问题,一次性油脂润滑;可实现750℃高温进风;●已有多台最大直径1.6m的工程实例,且运行平稳,深受客户好评。●适用物料:膏状、滤饼状、热敏性物料,如氢氧化镁、氢氧化铝、氧化锌等。
Evaporation system ● Traditional multi-effect evaporation system: large evaporation, wide application and mature technology ● Hot-melt multi-effect evaporation system: only used for evaporation of ten-point mirabilite with small evaporation, saving energy and investment; ● Heat pump Low-temperature multi-effect vacuum evaporation system: evaporation temperature is low, all equipment are atmospheric equipment. ● MVR vapor compression pump type single effect evaporation system: only a small amount of steam, the secondary steam saturation temperature by the compressor. Flash dryer ● solve the problem of high temperature transmission and sealing, one-time grease lubrication; can achieve high temperature 750 ℃ into the wind; ● has more than 1.6m maximum diameter engineering example, and stable operation, praised by customers. ● Materials: paste, filter cake, heat-sensitive materials, such as magnesium hydroxide, aluminum hydroxide, zinc oxide and so on.