论文部分内容阅读
几年来,我厂为改变技术落后的状况,在上级有关部门的大力支持下,先后引进了西德、日本等工业发达国家的八项先进技术,经消化吸收,制造出了具有国际先进水平的给水泵,增强了为大型电站配套的能力。同时,我们还将引进的技术进行移植,为我所用,促进了老产品改造和新产品开发,使两种产品分别获得了国家金质奖和银质奖。实践证明,积极引进技术,是企业技术进步的重要途径。一、端正思想,明确目标,积极引进尽管我厂在全国水泵行业中是个大厂,但我们的产品水平与世界先进水平相比还有较大差距。一是效率低5-10%,寿命短1-3倍;二是品种不全,成套性差,有些产品还不能生产。因此,如何把产品水平搞上去,为用户提供品种全、质量好、水平高的
Over the past few years, in order to change the state of backward technology, with the strong support of the relevant departments at the higher level, our factory has introduced eight advanced technologies from industrialized countries such as West Germany and Japan. After digestion and absorption, our factory has produced advanced international standards. Feed pumps have enhanced the ability to support large-scale power stations. At the same time, we will also transplant the imported technology for my own use, and promote the transformation of old products and the development of new products, so that the two products have won the National Gold Award and the Silver Award respectively. Practice has proved that the active introduction of technology is an important way for technological advancement of enterprises. First, correct thinking, clear goals, and actively introduce Despite our factory is a big factory in the national pump industry, but our product level compared with the world’s advanced level there is still a wide gap. The first is that the efficiency is 5-10%, and the lifespan is 1-3 times shorter. Second, the varieties are incomplete and the set is poor. Some products cannot be produced yet. Therefore, how to put product levels up and provide users with complete varieties, good quality, and high levels