论文部分内容阅读
使用维修中拆卸安装缸套时,应注意以下几个问题: 1.拆卸时应先将缸套上边缘积炭清除干净,以便话塞、活塞环顺利推出缸套。从缸套座孔中取出缸套最好用专用工具(带有三爪的螺旋拉出器),如果没有专用工具,也可用铜棒顶住缸套下边缘,砸出缸套,但必须注意防止缸套下边缘变形和损坏。安装缸套前,应仔细检查和修整,确认完好,才能重新装复使用。
When using and disassembling and disassembling the cylinder liner, pay attention to the following questions: 1. When disassembling, remove the carbon deposit on the upper edge of cylinder liner so that the piston and piston ring can be smoothly introduced. Remove the cylinder liner from the cylinder sleeve hole with a special tool is best to use (with three claw spiral puller), if there is no special tool, you can use copper rods to withstand the lower edge of cylinder liner, hit the cylinder liner, but care must be taken to prevent The lower edge of the cylinder liner is deformed and damaged. Before installing the liner, should be carefully checked and trimmed to confirm intact, can be re-installed.