论文部分内容阅读
我厂技术革命标兵黄裕成同志,与车间检验工一起,经过多次研究和试验,制成了轴承环内经检验的工具,突破了生产中的薄弱环节,使工效和质量都得到提高。结构简介图中摇手柄1和凸轮工具联在一起的,所以,当凸轮2转动时,推动杠杆3,使升降杆6带着样柱8作上下移动进行测量。推料板12,通过推杆11、送料杆10与升降杆6用肖子联接。因此,在升降杆6上下移动一次时,推料板12也正好推一个工件到被检验位置上。当推料板12送走一个工件复位时,另一工件靠其本身重量,从一
Comrade Huang Yucheng, our technical revolution model comrade, worked with the shop inspector through many research and experiments to make the tested tools within the bearing rings, breaking through the weak links in production and improving the work efficiency and quality. In the picture, the handle 1 and the cam tool are linked together. Therefore, when the cam 2 rotates, the lever 3 is pushed to move the lifting rod 6 up and down with the sample column 8 for measurement. Push plate 12, through the push rod 11, the feed rod 10 and the lifting rod 6 Xiao son connection. Therefore, when the lifting rod 6 moves up and down once, the pushing board 12 also pushes a workpiece to the tested position. When the pusher plate 12 sent away a workpiece reset, the other workpiece by its own weight, from one