论文部分内容阅读
Gas with high pressure is widely used at present as fuel storage mode for different hydrogen vehicles. Differenttypes of materials are used for constructing these hydrogen pressure vessels. An aluminum lined vessel and typicallycarbon fiber reinforced plastic (CFRP) materials are commercially used in hydrogen vessels. An aluminumlined vessel is easy to construct and posses high thermal conductivity compared to other commercially availablevessels. However, compared to CFRP lined vessel, it has low strength capacity and safety factors. Therefore,nowadays, CFRP lined vessels are becoming more popular in hydrogen vehicles. Moreover, CFRP lined vesselhas an advantage of light weight. CFRP, although, has many desirable properties in reducing the weight and inincreasing the strength, it is also necessary to keep the material temperature below 85 ℃ for maintaining stringentsafety requirements. While filling process occurs, the temperature can be exceeded due to the compression worksof the gas flow. Therefore, it is very important to optimize the hydrogen filling system to avoid the crossing of thecritical limit of the temperature rise. Computer-aided simulation has been conducted to characterize the hydrogenfilling to optimize the technique. Three types of hydrogen vessels with different volumes have been analyzed foroptimizing the charging characteristics of hydrogen to test vessels. Gas temperatures are measured inside representativevessels in the supply reservoirs (H2 storages) and at the inlet to the test tank during filling.
Gas with high pressure is widely used at present as fuel storage mode for different hydrogen vehicles. Different aluminum alloys used in hydrogen storage vessels (CFRP) are commercially used in hydrogen vessels. An aluminumlined vessel is easy to construct and posses high thermal conductivity compared to other commercially availablevessels. However, compared to CFRP lined vessels, it has low strength capacity and safety factors. Thus, nowadays, CFRP lined vessels are becoming more popular in hydrogen vehicles. CFRP, although, has many desirable properties in reducing the weight and increasing the strength, it is also necessary to keep the material temperature below 85 ° C. for maintaining stringent safety requirements. While filling process occurs, the temperature can be exceeded due to the compression works of the ga s flow. Therefore, it is very important to optimize the hydrogen filling system to avoid the crossing of the critical limit of the temperature rise. Computer-aided simulation has been conducted to characterize the hydrogenfilling to optimize the technique. Three types of hydrogen vessels with different volumes have been analyzed foroptimizing the charging characteristics of hydrogen to test vessels. Gas gases are measured inside representativevessels in the supply reservoirs (H2 storages) and at the inlet to the test tank during filling.