碱—白云石反应及碱—碳酸盐岩反应的膨胀机理

来源 :硅酸盐学报 | 被引量 : 0次 | 上传用户:hahaxine
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
应用分析电镜/能谱仪(AEM/EDS)和薄膜试样分析技术,研究了与碱反应前后活性碳酸盐岩的结构和组成变化,采用EDS定量分析测定了白云石晶体的Ca/Mg(C)的分布,从理论上求出了碱-白云石反应碱溶液的pH临界值与白云石的组成C有关。认为采取降低混凝土溶液PH值的措施不能保证以活性碳酸盐岩作集料的混凝土的耐久性。提出碱-碳酸盐岩反应膨胀机理是:固相产物吸水肿胀加上产物水镁石和方解石晶体生长及重排产
其他文献
Phenol is an important commodity for the chemical industry, used for many processes and deemed to be a major pollutant due its xenobiotic nature and high toxici
Some remarks are made on the use of the Abadie constraint qualification, the Guignard constraint qualifications and the Guignard regularity condition in obtaini
In this paper, we present parallel implementation of the Gauss-Seidel (GS) iterative algorithm for the solution of linear systems of equations on a k-ary n-cube
利用三维编织的碳纤维预制体,采用等温CVI的方法制备出了碳纤维增韧碳化硅复合材料。对于无碳界面层的复合材料(C/SiC),弯曲强度和断裂韧性随密度的提高而提高,最大值分别为520MPa和16.5MPa·m^1/2。密度
根据水泥基复合半刚性面层材料的微结构,建立把裹橡胶沥青粗集料颗粒球和水泥砂浆空心基体球嵌入CBSCC等效复合材料介质中的三层嵌套模型,推导了热应力计算公式。计算结果表明,降温时
This paper considers two-level integer programming problems involving random fuzzy variables with cooperative behavior of the decision makers. Considering the p
在微观结构研究的基础上,分析了SiC晶须增韧Al_2O_3陶瓷刀具材料的增韧特性和机理。由于受热压过程的影响而造成晶须在基体中定向排布于垂直热压轴方向的平面中,因此不同方向
在Si-Al-O-N系统中,进行(β'+12H)-sialon的成分设计,并以Sm2O3作为添加剂,用气压烧结(GPS)制备了β'+12H复相陶瓷。材料的相组成和微观结构研究表明:主晶相为β'相和12H相,纤维状的12H与短柱状或等轴状的β'交织排列形成致密组织
1 一次有益的争论  这是一个工程实例.一幢教学楼,长80.4 m,宽11.1 m,高21.1 m(包括屋面装饰构架),设计方按三类防雷设防.  ……
期刊
Procedures of mathematical modeling of thin solid-state converters of neutrons are described and converters a foil from natural gadolinium and its 157 isotopes