聚六亚甲基碳酸酯二醇增韧环氧树脂的固化动力学

来源 :物理化学学报 | 被引量 : 0次 | 上传用户:wio120we
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The kinetics of the cure reaction for the system consisting of bisphenol-A diglycidyl ether, No.70 anhydride, Polyhexamethylene Carbonate Diol(PHMCD) and DMP-30 has been studied. By use of differential scanning calorimetry(DSC) under isothermal condition, the reaction is found to proceed first via autocatalytic mechanism up to a conversion of 0.3 and then become a first order reaction over a temperature range of 130 ~ 160 ℃. The kinetic parameters of the curing reaction have also been deterndned with both E1 = 63.74 kJ.mol-1, lnA1=13, lnA2 = -3for the autocatalytic mechanism and E =64.68 kj .mol-1, lnA = 13.8 for the first order mechanism. The kinetics of the cure reaction for the system consisting of bisphenol-A diglycidyl ether, No. 70 anhydride, Polyhexamethylene Carbonate Diol (PHMCD) and DMP-30 has been studied. By use of differential scanning calorimetry (DSC) under isothermal condition, the The reaction is found to proceed first via autocatalytic mechanism up to a conversion of 0.3 and then becomes a first order reaction over a temperature range of 130-160 ° C. The kinetic parameters of the curing reaction have also been deterned with both E1 = 63.74 kJ. mol-1, lnA1 = 13, lnA2 = -3 for the autocatalytic mechanism and E = 64.68 kj. mol-1, lnA = 13.8 for the first order mechanism.
其他文献
本文介绍的水力-机械式封口器是在用堵漏剂封堵井下套管的漏眼后防止堵漏剂从漏眼返吐的一种封口工具,经现场试验表明,工作可靠,成功率达92.3%。 This article describes the
结合金刚石与硬质合金复合材料的研究,对含轻元素的界面扩散问题提出了能谱仪与波谱仪原位互补分析研究的方法,从扩散深度和扩散浓度分布两种角度探讨了扩散系数的电子探针测定
对于汽车的维修,其十分重要的部分是对汽车发动机的维修。目前汽车发动机在国外几乎全部采用电喷系统,在国内一些汽车(主要是轿车)也已采用。在这种形势下,作为一个维修人员
中国石化总公司润滑油评定方法审查和评定工作会议于1985年9月10—13日在新疆独山子炼油厂召开。各有关炼油厂的科研所、石油化工科学研究院、石油设计院、润滑油测试评定中
樱花盛开正当时,千里姻缘一线牵。3月21日,央视CCTV婚恋交友栏目《乡约》走进广州从化天适樱花悠乐园进行了户外录制,现场大批“樱粉”慕名前来,掌声阵阵,欢笑不断。中国十佳
目的:构建pEGFP-C2-HPV16E6真核表达载体,转染CaSki细胞,检测其在CaSki细胞中的表达。方法:用RT-PCR法从CaSki细胞中扩增出带有HindⅢ、XbaⅠ酶切位点的HPV16E6基因片段,将HP
国外石油钻井监测仪表已戏经历了几个发展阶段。从分立的机械或液压仪表到集中组装于操作台的机电混合综仪表系统经历了很长的年代。直到六十年代末期开始引入以 Foreign o
西部民族地区在实施西部大开发战略中 ,必须实现开发机制和开发模式的转换。主要是实现计划经济模式向市场机制模式、封闭开发模式向开放开发模式、粗放型开发模式向集约型开
采用SEM、TEM 等研究了86CrMoV7 钢锻热淬火后回火过程的组织与性能。结果表明:锻热淬火能提高马氏体的回火稳定性,使粒状珠光体中碳化物尺寸减小,分布更加均匀,显著提高综合力学性能 The micr
本文所述的“混合滑车组”指由阻力系数不同的两台滑车组成的滑车组,如一台滚动轴承滑车(阻力系数为1.02)和一台青铜滑动轴承滑车(阻力系数为1.04)组成的滑车组。这种混合滑